DetraSet Lab Care Learn GB - Flipbook - Side 20
T E C H N I C A L S P E C I F I C AT I O N S
Detra units
UPPER PART
TECHNICAL INFORMATION
Material:
Aluminum
Surface:
Naturally anodized aluminum 15 µm
Dimension:
Available in sizes: 160 - 600 mm
Different possible upper parts:
Upper part for wooden shelf
Upper part for wooden shelf assembly
Upper part for glass shelf
Upper part for glass shelf assembly
SYSTEM BENEFITS
• Made to last – Manufactured in sustainable aluminum material.
• Replaceable in case of defective upper parts.
• When the upper part is used with an inclined lower part, attention should be paid to the
installation 30 mm from the back edge of the shelf.
• The upper part must be at least 50 mm longer than the lower part
• The upper part is available in different profiles for:
- Wooden shelves T
- Wooden shelf assemblies TS
- Glass shelves G
- Glass shelf assemblies GS
- Single and double for shelf assemblies
LOWER PART
TECHNICAL INFORMATION
Material:
Die-cast zinc and powder coated.
Surface:
Black RAL 9005
White RAL 9010
Aluminum RAL 9006
Untreated/raw zinc
Dimension:
Available in sizes: U110 – U450 mm
Different possible lower parts:
Lower part
Inclined lower part
SYSTEM BENEFITS
• Made to last – Manufactured in die-cast zinc material.
• Replaceable in case of defective lower parts or options for combinations of different colours.
• Using the bracket’s adjustment, shelves can always be set at 90 degrees.
• At the tip of the lower part, a pinole screw is mounted for fastening the upper part.
• Lower part in size: 450 mm can be used for mounting e.g. tabletops or alternatively a specially
made steel bracket can be used.
20 | TECHNICAL SPECIFICATIONS
