2021/2022 Wallboard Catalogue - Catalog - Page 90
Self Drilling Eye Lag
•
•
A.
2000/ctn.
Installed without the need for pre-drilling holes in heavy gauge metal
• Self drilling tip
For heavy gauge steel from 14 gauge to 20 gauge
• 3" overall, 1.75" threading
GBH2
B.
Eye Lag Installation Tool
•
•
Heavy Duty T-Square - 48" and 54"
•
•
•
•
•
•
B. Silver:
48" - CB3999
54" - CB4000
Grid Hole Punch
•
•
•
•
6/ctn.
2/ctn.
Magnetic Nail Driver
12/ctn.
•
•
•
•
•
Used to punch holes in a Q-decking for Hanger/pencil
Rods to allow for installation of suspended ceilings
Designed to easily bend and shape
heavy gauge Hanger/Pencil rods
•
•
•
6/ctn.
Absorbs shock well
Available in various weighted heads
•
•
Decreases install
time significantly
1/ctn. , 1/ctn
Designed to install metal cornerbead to drywall without using nails or screws
Centers the cornerbead during installation
• 24 oz. rubber mallet included
1-1/4" - ST0002 | 1-1/8" - ST0003
End Cutting Nippers
Magnetic Bit Tip Holder
6/ctn.
Heavy-duty cutting tool designed to cut Hanger/Pencil
Rods used for suspended ceilings
•
•
•
8" comfortable rubber
gripped handles
Permanently mounted magnet
Magnetizes and holds a 1/4" bit tip
•
•
1/ctn.
C-ring holds the 1/4" bit tip in place
Will fit any standard drill or screw gun
GBMBH143
ST0014
Eye Lags
#2 Phillips Bits
1000/ctn.
•
•
For attaching suspended ceiling Hanger Wire to wood • 3" overall, 1.5" threading
Sharp point screws go in with ease using the Eye Lag installation tool (GBELAT)
Reduced #2 Phillips bit tip
1" bit length
100/bag
•
•
Hardened steel for longer life and use
Will fit any standard drill or screw gun
GB2BIT
GB3ELZ
89 | Wallboard Trim & Tool
Made of black, ultra-robust rubber
14" varnished hickory handle
Cornerbead Clincher with Rubber Mallet
1/ctn.
ST0013
•
•
Lets you reach very tight spots
5/8" hexagonal shank
16 oz. - CB17523 | 24 oz. - CB17524 | 32 oz. - CB17525
Wire Bender
•
•
•
Rubber Mallet - 16/24/32 oz.
1/ctn.
ST0012
Heavy duty steel construction •
with comfortable rubber grips
Made of stainless steel
Grips nails tightly
6/ctn.
5.5" ST0006 | 8" - ST0007
Deck Punch
•
Ideal tool for joining metal studs to metal track •
Nickle plated to prevent corrosion
6/ctn.
Ideal length handles to allow ideal
torque for crimping metal stud to track
ST0001
Rapidly twists #9 or #12 Hanger/Pencil Rods to fasten suspended ceilings
Secure suspended ceiling grids to manufacturers specifications and local Building codes
Heavy duty steel construction
with comfortable rubber grips
Specifically designed for acoustical grid systems
Cuts or “punches” perfect 1/8" holes for various applications
Mini Stud Crimper
#12 - ST0015 | #9 - ST0016
•
1/ctn.
KFGG159
Serpent Wrench - #12/#9 Hanger Rod
•
•
Installs all types of eye lag screws, as well as self-tapping and self-drilling versions
Will fit any standard drill or screw gun
• 2.5" overall length
GBELAT
Heavy duty 3/16" aluminum
Long wearing, black easy-to-read 1/16" markings
Special marking at 16" for quick stud finding
Reversed rule
Notched head has a lip that rests on the edge
of drywall to easily mark for cuts
Bright yellow colour makes it easy to spot
on the jobsite
A. High Visibility:
48" - CB3997
54" - CB3998
1/ctn.
www.wallboardtrim.com
P: (800) 590-5799
P: (800) 590-5799
www.wallboardtrim.com
FRAMING & HANGING TOOLS | 90
