Saniflo Product Catalogue - Catalog - Page 37
APPLICATIONS
TOILET
HAND
BASIN
BATH
SHOWER
WASHING DISH
MACHINE WASHER
KITCHEN
SINK
Sanicubic 2 VX
®
WMTS 106:2019
Certificate No. 23048
Manufacturer: SFA
Brand: Saniflo
PRODUCT REFERENCE:
SA111
SINGLE PHASE
Sanicubic® 2 VX is a powerful lifting station used for demanding commercial
situations. It features twin 2000w motors, vortex blade-less pumping technology
which is well suited for applications to eliminate blockages.
Two integrated non-return valves and four inlets:
40/50/100/110 mm and one inlet 40/50 mm.
LIFTING
STATION
Working temperature of 35°C. Will handle up to
70°C for short periods.
Volt free contact for connection to a Building
Management System
Control panel has built in alarm, with an additional
wired alarm.
Control panel mounted up to 4 m from pump and
additional alarm can be mounted up to 5 m from
control panel.
Base of pump needs to be minimum 275 mm below
lowest fixture
Allow 200 mm clearance around pump for maintenance
purposes
Note: Isolation valves should
be fitted to the inlet pipework
and discharge pipework to
isolate the unit for servicing.
VERTICAL/HORIZONTAL PERFORMANCE
Increase size of horizontal run by one pipe size after 5m.
All horizontal pipework requires a minimum of 1:100 fall.
10m max
9m
8m
7m
WHY CHOOSE THIS PRODUCT?
Ideal for large volume commercial situations.
Large bore vortex pump with a 50 mm free passage
capable of pumping waste water without the need
to macerate.
Easily removable motors for servicing and maintenance.
Made in France to the
highest standards,
needs to be installed
by a licensed plumber
35
6m
5m
4m
3m
2m
1m
Large 120 L tank volume.
Easy to install – no need to excavate.
Two alarms for ultimate safety – both hard-wired.
1%
10 2030405060708090 100 metres
