Saniflo Designer Hub - Catalog - Page 10
GREY WATER PUMP
Back to index
APPLICATIONS
Product sheet
Instruction sheet
SHOWER
WMTS 106:2019
Certificate No. 23048
Manufacturer: SFA
Brand: Saniflo
PRODUCT REFERENCES:
SA112/SA113/SA114
Sanifloor +
®
Sanifloor®+ allows a shower to be installed easily and economically without
major work accessing sewer pipes. The pump sucks the water from the
shower gully and discharges back to the existing sewer line. Installing a
stylish walk-in shower is easy with a Sanifloor®+.
WHY CHOOSE THIS PRODUCT?
TECHNICAL CHARACTERISTICS
Suits walk in showers and low level shower trays
Discharge Pipework
25 mm
Ideal for high flow applications
Motor Power
400 Watts
Voltages
220-240 V/50 Hz
Working Waste Water Temp
35°C
Product Weight
7.9 kg
Overall Measurements
295 x 191 x 164 mm
IP Rating
IP44
Pump and waste inlet can be up to 3 m apart
horizontally
Dual function - sucks waste up from the gully and
pumps waste water away up to 3 m vertically or
30 m horizontally
Pump can be positioned up to 300 mm above the gully
All gully types are 90 mm in diameter
Wireless activation
GULLY TYPES
24mm OD suction pipe
Ref SA112:
With shower waste gully for vinyl
floor - Height 68 mm
VERTICAL/HORIZONTAL PERFORMANCE
Ref SA113:
Increase size of horizontal run by one pipe size after 5m.
All horizontal pipework requires a minimum of 1:100 fall.
With shower waste gully for tiled
floor - Height 68 mm
Ref SA114:
With shower waste gully for trays Height 63 mm
3m
2m
1m
1%
10
20
30 metres
295
Ø16
2
Made in France to the
highest standards,
needs to be installed
by a licensed plumber
10
1
0
150
191
3
271
290
FLOW RATE PERFORMANCE CHART
Discharge height (m)
164
24
25
26
27
28
29
30
31
OUTPUT (litres/min)
NOTE: To maintain radio signal integrity pump
must be installed in same room with power
cable end facing towards shower waste gully.
