2024 SeaValue Premium - Flipbook - Page 240
238
Steering and Controls
Steering Wheels
Rigging Supplies
SOFT GRIP STEERING WHEEL
BULKHEAD STRAIN RELIEF
Ideal for bass boats and runabouts. Comfortable firm
grip, soft, black PVC outer rim and high-impact, one-piece
plastic inner core. Non-magnetic. Black plastic center cap.
Fits standard 3/4" shaft. 33/8" dish.
Item#
23-83154
Diameter
13"-diameter rim
Distributes strain from bends in .250 OD to .485 OD hose.
Watertight gripper fitting-no leaks. Requires 11/4" installation
hole.
For bulk hose only, fittings cannot pass through.
Item#
Diameter
Special
232-BSR1KDPc
23/4"
29.99 EA
Special
54.99 EA
Trolling Motor Steering Kits
TM
By MarineTech
AUXILIARY MOTOR STEERING KIT
RIGGING FLANGE AND HOSE
Auxiliary motor steering kit provides remote
control steering for any type or size of
outboard trolling motor up to 25 horsepower.
Freshwater model is zinc plated steel
Saltwater model is stainless steel
Description
Special
Freshwater Kit
49.99 EA
Saltwater Kit
79.99 EA
Item#
781-552400
781-552600
Auxiliary Motor Steering
Chrome/Black Kit
Black Flange
White Flange
Protects cables and wiring from dirt, abrasion, sun and water. The flange connects
the rigging hose from the engine to the boat. Internal threads on the flange retains
the rigging hose to make rigging adjustments easy. The back side of the flange is
textured to allow inverted mounting. The rigging hose is durable, flexible, and kink
resistant and is commonly found on new boats.
Item#
Description
Color
Size
Special
232-RFK1CPDPc
Flange/Hose Kit
Chrome/Black
2" x 4'
79.99 EA
232-RF1DPc
Flange
Black
2"
21.49 EA
232-RF2DPc
Flange
White
2"
24.99 EA
TM
By MarineTech
T5 ELECTRO STEER STEERING SYSTEM
ZIPPERED RIGGING SLEEVE
The T5 provides a unique solution to steer a kicker motor
up to 40 hp. It can be installed on any kicker motor with
a threaded tilt tube without drilling any holes in the boat.
Installs in minutes and requires only 4" between the main
engine and the kicker. Controlled by an included 2 button
hand held remote with a 24' cable. Mounting hardware
included. Optional wireless remote available separately.
12V, 7.5 amps.
Item#
781-550503
Description
T5 Electro Steer
Fits with
Saltwater
Color
White
Protect your cables and hoses with this easy to remove
rigging sleeve. Made of rugged Sunbrella® fabric, this
sleeve will withstand the elements and resist fading. Easily
zips on and off to access cables or hoses when needed.
Ends are secured with cable ties sewn into pockets. Black.
Item#
Length
Special
48"
84.99 EA
232-ZRS1DPc
Special
799.99 EA
T5 NE ELECTRO STEER STEERING SYSTEM
The T5 NE models, without
electronics, connect directly to
the TrollMaster Pro 3 electronic
throttle and steering control unit
to provide an overall solution to
control the throttle and steering
for a kicker motor up to 40 hp.
It can be installed on any kicker
motor with a threaded tilt tube
550503
550502NE
without drilling any holes in the
boat. Installs in minutes and requires only 4" between the main engine and the kicker.
Mounting hardware included. 12V. (Does not include Electronics, Remote or Relay
Switch Box)
Note: This is not a stand alone system and requires the TrollMaster control unit to
operate.
Item#
Description
Fits with Color Special
781-550503NE Electro Steer, No Wiring Harness
Saltwater White 729.99 EA
CABLE BOOT
CB2
CBR1
Provides a fully open area to pass wiring and cables through and when rigging is
complete. Constructed of rugged black vinyl that resists UV rays, gasoline and oil.
Item#
Description
Qty
Special
232-CB2c
2" Cable Boot
Bulk
7.99 EA
232-CB1c
3" Cable Boot
Bulk
10.99 EA
232-CBR1c
3" Reinforcing Ring
Bulk
3.29 EA
41/2" Reinforcing Ring
Bulk
3.29 EA
232-CBR4c
Rigging Supplies
STEERING CABLE PROTECTOR
MOTORWELL BOOT
Seals off water intake and
protects cables, wiring and
gas lines. Made of durable
vinyl plastisol.
Item#
50-29301c
50-29251c
u-
Size
3"
4"
Special
6.99 EA
9.99 EA
WARNING Cancer Causing v -
Heavy-duty rubber boot to fit
over output end of steering
cable at engine for complete
protection from elements and
preventing lubrication from
being washed away. Fits all
standard steering cables including Morse, Teleflex,
Detmar, etc. Dimensions: 1" ID steering cable end,
3 / " ID output end, 11/ " overall diameter, 10" extended
8
2
length, 31/2" minimum length.
Item#
Special
50-28301c
8.99 EA
WARNING Reproductive Harm
w-
STEERING GUARD
Item#
50-28251
The Steering Guard should be installed
on all cable and side-mounted hydraulic
steering systems to lubricate, clean and seal
the system. Will more than double the life of
a new cable system. Made of stainless steel.
Installs in 10 minutes. Eliminates greasy
steering rods forever.
28251: Fits Honda, Mercury, Mariner,
Johnson, Evinrude, Nissan, Suzuki, Tohatsu,
Yamaha and Force with 7/8" thread.
Size
Special
7/ "
40.99 EA
8
WARNING Cancer and Reproductive Harm
See www.P65Warnings.ca.gov
