2024 SeaValue Premium - Flipbook - Page 223
Engine
HI-JACKER™ FIXED JACK PLATE
BOLT KIT FOR JACK PLATES
Bolt kit for mounting outboard engine to jack plates.
Kit contains:
• 4 each 1/2"-13 x 3" long bolts - stainless steel
• 4 each 1/2"-13 lock nuts - brass with nylon insert
• 8 each 1/2"-flat washers - stainless steel
Solid 3/8" aluminum extrusion, 3 engine mount and 2
transom mount holes, total vertical of 51/2" with a 4"
setback.
Item#
232-JP4FADPc
221
Setback
4"
Application
Max 150 hp
Special
229.99 BX
Item#
232-BK1DPc
Special
44.99 PK
TRANSOM TRIM CONTROL
MINI-JACKER™
Provides a weatherproof tilt control system at the stern
area of the boat. Can be used for remote adjustment of
hydraulic plates. 18" Marine grade tinned wiring harness
included.
Item#
Special
50-28131c
41.99 EA
Designed for clamp-on mount outboard motors up to 35
hp. Improves performance and handling of smaller or
lighter boats. Also allows mounting of long shaft motors
to shorter shaft transom boats. Engine mounting surface
is 111/2" x 10".
Item#
232-MJ1DPc
Special
209.99 EA
Motor Locks
ATLAS MICRO JACKER™ JACK PLATE
OUTBOARD MOTOR LOCK
• The smallest and lightest hydraulic jack on the market
is ideal for shallow water skiffs and flats boats. It has a
footprint of only 145/8" W x 111/2" H with a weight of only
23 lbs. The strong, self-contained actuator takes only 8
seconds to go from top to bottom and has 5" of travel. 3
mounting hole options on the transom side and 2 on the
engine side. Optional adapter available to accommodate
clamp-on outboard motors if needed.
Mounts over outboard mounting clamp handles. Made
of heavy gauge steel with long lasting black powder-coat
finish for years of protection against rust and corrosion.
Foam filler insert reduces noise and vibration. Mounts on
most outboard motors.
Item#
Finish
Special
220-OML0127c
Black Powder Coat
59.99 EA
OUTBOARD MOTOR LOCK
Item#
232-AHJM4DPc
Setback
4"
Application
115hp
• Heavy carbon steel design
• Fits over mounting clamp handles
• Recessed solid brass lock
• Noise dampeners reduce rattle
Item#
Finish
781-758000
Black Powder Coat
Special
1199.99 EA
ATLAS™ HYDRAULIC JACK PLATE
Designed to meet the demands of today's high
performance outboards. This one piece design featuring
the innovative Rod and Slot lifting system will handle the
stresses from the heaviest and most powerful outboards
on the market today. All hydraulics are built into the
jack, eliminating the installation of pumps and reservoirs
inside the transom as well as hydraulic hoses running
through the transom. The high-tech engineered polymer
rods are 6 times more abrasion resistant than steel and
are manufactured from self-lubricating material. Lifts
from top to bottom in 8 seconds and installs in half the
time of comparable jacks.
Setback Finish
Simply replace one of the sterndrive mounting nuts for
theft protection. Stainless steel with free-spinning collar
that will turn if attacked by gripping tools. No assembly
required. Fits Mercruiser® Alpha, Bravo I-III (Incl. X &
XR), Blackhawk, OMC Cobra & King Cobra, and Volvo SX
& DP-S stern drives.
Item#
Description
Finish
371-74018c Single Stern Drive Stainless
10"
Aluminum
1999.99 EA
10"
Black
2049.99 EA
OUTBOARD LOCK
Stainless Steel Finish. Designed to lock the
outboard onto the transom, simply replace one of
the mounting nuts with a McGard locking nut. A
free spinning collar turns if attacked by gripping
tools, protecting against theft and inconvenience.
(74049 fits most of the motors listed and will
fit other small outboards with a 5/16" hole in the
transom bracket for mounting the motor.)
• Distributes the stress of the motor mounting bolts
• High quality cast aluminum
• 3/8" thickness
Description
13" Bolt Hole Pattern
10" Bolt Hole Pattern
Special
44.99 EA
35.99 EA
Item#
371-74036c
371-74037c
371-74038c
KEY: Blue Item # =NEW
|
Red Item # =HAZARDOUS
| vOversize |
Special
45.99 EA
Special
TRANSOM SUPPORT PLATE
Item#
232-TSP1DPc
232-TSP2DPc
Special
35.99 EA
STERN DRIVE LOCK
AHJ10VDP
Item#
Rating
Atlas™ Hydraulic Jack Plate
232-AHJ10VDPdc
c
Up to 300hp/625 lbs.
Atlas™ Hydraulic Jack Plate - Black
232-AHJ10VBDPdc
c
Up to 300hp/625 lbs.
TM
By MarineTech
Description
1/2-20 Merc/Mariner 40+ hp (2-stroke), Merc 25+ hp
(4-stroke), Suzuki 150-300 hp
M12 x 1.25 Yamaha 40+ hp (2-stroke), 30+ hp
(4-stroke), Honda 40+ hp, Suzuki 25-140 hp (2005 &
newer)
1/2-13 Johnson/Evinrude 40+ hp (2-stroke)
Special
45.99 EA
45.99 EA
51.99 EA
To Our Valued Customers: Prices are subject to change without notice
