2024 SeaValue Premium - Flipbook - Page 127
Plumbing
CARTRIDGE BILGE PUMP
ROUND AUTOMATIC BILGE PUMPS
Common chemical & fuel resistant,
impact resilient thermo plastic body
design with removable motor cartridges. 316 Stainless
Steel Shaft and Corrosion Resistant Hardware. Check
Valve and 3/4" Straight or 90° Dura-Ports allow multidirectional hose routing. Easy to maintain or replace with
removable motor cartridges that allow any capacity motor
without removing the entire pump.
Ignition protected, submersible,
double insulated motor runs cooler and can run dry.
Double strainer non-clogging protection. Compact,
efficient and maintenance free. Moisture tight PTFE
seals. Silent running, vibrationless w/anti-airlock
feature. Heat resistant housing with a 5/16" stainless
shaft and a nylon/fiberglass impeller.
Item#
29-25SAc
29-27SAc
Volts
12
12
GPH
500
1100
Hose
3/ "
4
1" & 11/8"
125
Amps
1.9
3.3
Special
109.99 EA
152.99 EA
HIGH CAPACITY BILGE PUMPS
Designed for the toughest applications. Designed
to produce the highest capacity available for a
pump its size.
Item#
189-32503c
189-32703c
189-32903c
189-42123c
Volts
12
12
12
12
GPH
500
750
1000
1250
Hose
/4"
/4"
3/ "
4
11/8"
3
3
Amps
2.5
3
3.2
3
Item#
Fig. Description
Replacement Motor Cartridges & Parts
189-28552c
3a
Motor Cartridge 500 GPH
189-28572c
3b
Motor Cartridge 750 GPH
189-28512c
3c
Motor Cartridge 1000 / 1250 GPH
Special
49.99 EA
69.99 EA
79.99 EA
89.99 EA
Special
31.99 EA
49.99 EA
59.99 EA
ULTIMA AUTOMATIC BILGE PUMP
Item#
29-02b
29-10a
Description
Standard Series
Standard Series
GPH
1500
2000
Hose
11/8"
11/8"
Volts
12
12
Amps
4.8
8.4
• 3/4" straight or 90º Dura-Ports
• Completely sealed electronic fluid
• Check valve eliminates pump cycling.
sensing switch prevents corrosion
• Easy replacement with removable basket • 3 year warranty
RULE-A-MATIC® FLOAT SWITCH
This popular design includes a removable base for easy
cleaning and servicing, a mercury free snap switch tested
to over one million cycles and marine grade "blocked" wire.
2-Year limited warranty.
Item#
29-35Aa
Description
w/o Fuse Holder
Compact design bilge pump with non-exposed patented
electronic integrated fluid sensing switch. Allows multidirectional hose routing, easy installation, and prevents
pump housing cracking due to hose overtightening.
Special
139.99 EA
174.99 EA
Size
21/4" x 5" x 13/4"
Volts
12/24
Amps
14
Special
44.99 EA
Item#
189-3247258003c
189-3247259003c
189-3247260003c
189-3247261002c
Size
21/4" x 5" x 2"
Volts Amps
12/24 20
Special
69.99 EA
• Comes with 11/8" & 11/2" internally
threaded duraports
• Low amp draw
Item#
Volts GPH
189-1600400c
12
1600
189-22004c
12
2200
Size
3" x 53/8" x 21/2"
Volts
12 /
24
Amps
20
Special
59.99 EA
3-WAY LIGHTED ROCKER PANEL SWITCH
Has a built-in fuse holder and an internally lighted rocker
switch with 3 positions with the "fail-safe" spring return "off"
from the "manual" position. Black plastic panel.
Item#
29-43a
KEY: Blue Item # =NEW
|
Volts
12
Size
27/8" W x 23/8" H
Red Item # =HAZARDOUS
Special
109.99 EA
119.99 EA
139.99 EA
159.99 EA
| vOversize |
• Removable check valve
• 3 year warranty
Hose
11/8" & 11/4"
11/8" & 11/4"
Amps
7
7.5
Special
139.99 EA
179.99 EA
Compact mechanical switch offers a combination of
reliable sold state electronics and a sealed float switch for
reliability. Features a 3 second delay to prevent false starts.
High impact plastic withstands the toughest conditions.
Activates at 2" and deactivates at 3/4" water level.
Item#
Volts
Amps
Special
12
15
69.99 EA
189-36152c
The Rule-A-Matic Plus float switch has a strong, fully
integrated and impact resistant cover to protect against
debris and jamming, abrasive resistant marine grade
wire, and a built-in test feature. 2-Year limited warranty.
Description
w/o Fuse Holder
Amps
2.5
3
3.2
3
ELECTRO-MAGNETIC FLOAT SWITCH
RULE-A-MATIC® PLUS™ FLOAT SWITCH
Item#
29-40Aa
Hose
/4"
3/ "
4
3/ "
4
11/8 & 11/4"
3
Features a liquid cooled, tall stack 12 pole motor, double
ball bearing design, lip seal (1600 GPH), mechanical
seal (2200 & 4000 GPH). Removeable check valve and
threaded port design. 1600 & 2200 models utilize the
same baseplate as the Rule 2200 for easy replacement.
The non-mercury SuperSwitch is designed for the
toughest applications. Includes marine grade 14 gauge
"blocked wire," larger float for increased buoyancy,
removable base for easy servicing and a reliable snap
switch design. 5-Year limited warranty.
Description
w/o Fuse Holder
GPH
600
800
1000
1250
HEAVY DUTY BILGE PUMP
SUPERSWITCH™ FLOAT SWITCH
Item#
29-37Aa
Volts
12
12
12
12
Special
69.99 EA
ULTIMA SWITCH
Patented Mirus field effect detector cells detect disruptions
caused by water and fluids, and are not affected by oil or
foreign debris. Electronic Switch with no moving parts
and totally sealed solid-state electronics, this mercuryfree switch never corrodes or jams on debris. Activates/
deactivates at 2" and 3/4" fluid levels. Rated to handle pumps
up to 20 amps at 12V or 24V DC.
Item#
Volts
Amps
Special
189-36303c
12/24
20
74.99 EA
To Our Valued Customers: Prices are subject to change without notice
