2023 Online Catalog - Flipbook - Page 452
16 WS2 Quick Connect Injector Valve Body Assembly
*Any C3162-XXX flow control may be
used. WS2 valves are shipped with a
C3162-022 (2.2 gpm) flow control. Flow
control sizes range from 0.7 up to 10
gpm. WS2 valves can only be set for
minutes of fill because various sizes of
flow controls can be used.
Backwash Only
CL3149
CL3499 Cap
installed from factory.
To calculate for pounds or kilograms
of salt, take minutes of fill times the
flow rate of the flow control being used
to arrive at the number of gallons of
water be added to the brine tank. Each
gallon of water will dissolve approximately 3 pounds of salt.
CL3151
**Use of C4915 may severely reduce
brine draw rates.
A C3731 WS2 INJ DRAW TUBE
DOWN ASY contains one C1262 ORING 118 and two C3639 O-RING 119.
CL3150
A C3730 WS2 INJ FEED TUBE DOWN
ASY contains three C3638 O-RING 113.
CL3105
C3010-2X injectors and the
C3010-15ADAPTER contain a C3283
O-RING 117 and a C3284 O-RING 114.
The C3010-15ADAPTER can be used
with any C3010-15X injector so the 2"
valve can be used on smaller tank sizes.
The C3010-15X injector contains one
C3416 O-RING 012 (lower) and one
C3171 O-RING 013 (upper).
CL3277
CL3231
Proper RFC orientation
directs refill water flow
toward the washer face
with radius and text.
Backwash Only Valves include a
C3499 but do not include the following
parts: C3189, C4915, C3162-022, C3231
and C3277.
CL3231
Water Flow
CL3643
CL3315
CL3730
C-Series, Signature, Clack
8
CL3724
CL3477
CL3152
CL3731
CL3727
CINJ-15C
CINJ-15D
CINJ-15E
CINJ-15F
CINJ-15G
CINJ-15H
CINJ-2A
CINJ-2B
CINJ-2C
CINJ-2D
CINJ-2E
CINJ-2F
CINJ-2G
For more information visit – NelsenCorp.com
• Commercial.NelsenCorp.com •
All prices and products subject to change without notice. ©Nelsen Corporation
VestaWater.com
