2023 Online Catalog - Flipbook - Page 292
10 Commercial In/Out Tank Head & Basket, Resilite Test Lights, Distributor Heads, Drain Line Fittings
Fleck Upper Basket
Upper basket that screws into upper 2-1/2" heads or control valves with stainless steel screws.
$
TDB1050-SS
Fleck Upper Basket w/SS Screws
4.00
Commercial In/Out Tank Head
TDB1050-SS
This In/Out tank head features a 1-1/2" inlet and outlet and a 1-1/2" distributor opening. This head also
features a slotted upper basket, sold separately.
HEAD-APW4112-4.0-15-DF
Noryl® In/Out Head, # 4112,
$
1-1/2" F x 1.5" O-Ring DIST Downflow
66.00
HEAD-APW4112-UPPER BASKET Noryl® In/Out Head, # 4112
$
Upper Basket Only
101.00
HEAD-APW4112-4.0-15-DF
Mineral Tanks, Internals & Acces.
RA201-890
RESILITE LED TEST LIGHT
C1190
Resilite LED Test Lights
The patented Squarewave Resilite is a positive, reliable and economical method of monitoring water
quality via conductivity. Bright red/green visual output is easy to read. The monitoring is simple: the
green light indicates the water conductivity is below the threshold value, the red light warns that it
is above. Uses a wall transformer to convert 100v to 9v to insure safe operation and longer life. 220v
European is also available. When ordering make sure to specify conductance. Available in 2 Meg ohm,
1 Meg ohm, 500k, 200k, 50k, 20k, 10k and 5k.
HEAD-APW4112-UPPER BASKET
1/2", 110 VOLT
$
RES7031-20K
1/2" 110V, 20k ohm Test Light
147.00
$
RES7031-50K
1/2" 110V, 50k ohm Test Light
147.00
$
RES7031-200K
1/2" 110V, 200k ohm Test Light
147.00
$
RES7031-500K
1/2" 110V, 500k ohm Test Light
147.00
$
RES7031-1MEG
1/2" 110V, 1 Meg ohm Test Light
134.00
3/4", 110 VOLT
$
RES7046-20K
3/4" 110V, 20k ohm Test Light
147.00
$
RES7046-50K
3/4" 110V, 50k ohm Test Light
147.00
$
RES7046-200K
3/4", 110V, 200k ohm Test Light
147.00
$
RES7046-500K
3/4" 110V, 500k ohm Test Light
147.00
$
RES7046-1MEG
3/4" 110V, 1 Meg ohm Test Light
134.00
DISTRIBUTOR HEAD FOR 1/2" TEST LIGHTS
The RA201-890 Distributor head is designed for installation of a 1/2" Resilite in single in-out applications on deionizers. The threaded opening on the outlet side places the monitoring electrodes into the
water flow for greatest accuracy.
$
RA201-890
Plastic with Brass Inserts, 3/4"
30.30
C-Series Plastic Distributor Heads
14
C1190-FP
CL-WRENCH
Designed for simple in-out filters such as pH neutralizers, carbon filters, etc. The C1190 head can be
used for Up-flow or Down-flow service. The head fits a standard 2½" NPSM tank thread and features
a 1.050" distributor opening. The C1190 features a drillable, pre-tapped ¼" FIPT vent port (found on
the C1190 only). The C1190FP is designed with a removable top, or fill port, and an internal screen.
The C1190FP internal screen is easily serviced and cleaned by using the service wrench, provided
with each head, to disassemble the head. The C1190 series heads require a C-Series fitting kit for a
proper plumbing connection. See Section 1 for optional fitting kits and option bypass valve. Note: For
upflow service with the optional bypass, it is necessary to mount the bypass upside down to maintain
all the bypass options.
$
C1190
In/Out Head
45.75
$
C1190-FP
In/Out Head w/Fill Port, inc. Wrench
91.00
$
CL-WRENCH
C-Series Wrench
20.10
Jaco Drain Line Fittings
FEMALE ELBOWS, TUBE X FIPT
J0302FE
3/8" Tube x 1/4" Female Elbow
J0303FE
3/8" Tube x Female Elbow
J0302FE
For more information visit – NelsenCorp.com
• Commercial.NelsenCorp.com •
All prices and products subject to change without notice. ©Nelsen Corporation
VestaWater.com
$
4.45
4.95
$
