2023 Online Catalog - Flipbook - Page 150
4
Media/Resin Loader, Mineral Extractors
Media / Resin Loader
Resins, Media & Chemicals
The Media/Resin Loader is a simple and fast way to load a tank without the need of a “funnel” or
“water”. Just place the filling head on the tank. Hook up a shop vac to one side of the head. Hook up
the media fill tube to the other side of head. Turn on vac and draw media into the head. Media will fall
into the tank. Any dust (like carbon dust) will be drawn into the vacuum, where it will be filtered out.
A fast and simple solution to a long time “industry” problem:
• Loads a cubic foot in 60 to 90 seconds
• No lifting of Media Bags
• No Funnel needed
• No water needed
• Spillage eliminated
• Can be used on 2½" or 4" threads
$
LOADER-RESIN
Resin Loader
406.00
RESIN LOADER SHOWN WITH VACUUM
SETUP & 2-1/2" LOADING HEAD
Mineral Extractors
The Mineral Extractor offers an inexpensive way to remove the expelled bed of any size or
height tank without removing the tank. It works with water pressure, not suction. It will
work on any and all types of beds and will even remove the gravel bed if necessary.
The MINERAL EXTRACTOR has a sealed cavity that is filled with liquid silicone to lubricate the O-ring
seals on the riser tube. The main body of the MINERAL EXTRACTOR carries a 5 year guarantee
against cracking.
STANDARD HIGH FLOW MINERAL EXTRACTOR
For use on all tanks with
2-1/2" x 8 NPSM tank threads.
MINERAL EXTRACTOR CHAMBERED VORTECH TANK
The Mineral Extractor is designed to be used on chambered
tanks with a fixed riser tube. The offset center shaft
will slide along the side of the stationary tube.
Included is a ”Cap Removal Tool” .
which is used to remove the plugs that
separate the different chambers from
each other. Also included is a lower
chamber extension for the removal
of media from the lower chambers, if
necessary. The ”Cap Removal Tool”
can also be used as a refill tube, by
removing the handle and using a funnel
inside the tube to wash in the new
media.
32
EXTRACTOR-STANDARD
Standard Resin Extractor, 2-1/2"
................
$
218.00
For more information visit – NelsenCorp.com
EXTRACTOR-VORTECH-MIDPLATE
Vortech Midplate Resin Extractor
• Commercial.NelsenCorp.com •
All prices and products subject to change without notice. ©Nelsen Corporation
...............
VestaWater.com
$
198.00
