2023 Online Catalog - Flipbook - Page 125
Selective Resins
A860 is a macro porous type 1 strong base
anion exchange resin with an acrylic matrix
for the adsorption of soluble tannins that
contribute to color and taste in drinking
water. Since is has an acrylic matrix like
the A850, it works the same way with the
removal of organic matter, regeneration and
removing weaker acids. It can also be used
is combination with a polystyrene-based
resin for the same effects. It is particularly
resistant to organic fouling, even where
loadings are relatively high.
matter in water used primarily for potable
applications. TANEX is useful in reducing
more difficult-to-control organic matter and
color that may exist as partially dissolved
and partially colloidal in nature.
ASM-10-HP is a strongly basic hybrid
anion exchange resin specially formulated
to selectively remove arsenic. It is supplied
A850 is a gelular type 1 strong base anion
in the salt form as clean, moist, tough,
exchange resin with an acrylic matrix
uniform, spherical beads. ASM-10-HP
for the adsorption of soluble tannins that
exhibits extraordinary throughput capacity
contribute to color and taste in drinking
in arsenic removal service on potable
water. The acrylic matrix ensures excellent
water supplies. Its performance is virtually
removal of organic matter from a water
SST-60 is a high-efficiency softening resin
supply in conjunction with its reversible
based on gel type shallow-shell technology. unaffected by common anions, such as
removal upon regeneration. This resin is
Lower hardness leakage. Significant savings chlorides, bicarbonates or sulfates. It is
regenerated very efficiently with lower
in salt usage. The shorter the diffusion path, effective over the entire pH range of potable
water. It has the highest arsenic removal
levels of sodium hydroxide than those
the more rapid the softening exchange
capacity of organic based arsenic removal
required for a polystyrene based type I
occurs. Reducing the depth of penetration
media, with no Arsenic dumping - effluent
resin, and yet it has a comparable ability
required to cleanse the resin allows for a
arsenic levels will not exceed influent levels
to remove weaker acids including carbonic more complete regeneration and provides
if resin is operated past exhaustion point.
acid and silica. It’s used in combination
a higher, more efficient utilization of the
Spherical and uniform particle size provide
with a polystyrene-based resin (for instance regenerant. The result is a resin with
low pressure drop and greater resistance
in a mixed bed positioned after the anion
unsurpassed salt efficiency, lower leakage
to bed compaction. Unlike granular, coated
unit) can often result in the removal of a
and reduced rinse water requirements.
medias, ASM-10-HP will not shed particles.
wider spectrum of organic compounds than
TANEX is a proprietary blend of special
ASM-10-HP is made from NSF/ANSI-61
either type of anion resin alone.
and patented anion exchange resins
validated Anion Exchange Resin.
used for removal of tannins and organic
PUROLITE A520E NITRATE SELECTIVE RESIN
For Nitrate removal in residential and community water systems. Regenerated with brine.
$
A520-100-BOX
1 Cubic Foot Box
772.00
$
A520-50-BOX
1/2 Cubic Foot Box
410.00
PUROLITE A850 TANNIN RESIN
A gelular resin for the adsorption of soluble tannins that contribute to color and taste in drinking water.
$
A850-100-BOX
1 Cubic Foot Box
794.00
$
A850-50-BOX
1/2 Cubic Foot Box
418.00
PUROLITE A860 TANNIN RESIN
A macroporous resin for the adsorbtion of soluble tannins that contribute to color and taste in drinking
water.
$
A860-100-BOX
1 Cubic Foot Box
879.00
$
A860-50-BOX
1/2 Cubic Foot Box
460.00
PUROLITE TANEX RESIN
Resin for the adsorbtion of soluble tannins that contribute to color and taste in drinking water.
$
TANEX-100-BOX
1 Cubic Foot Box
1,843.00
$
TANEX-50-BOX
1/2 Cubic Foot Box
964.00
PUROLITE SST-60 HIGH EFFICIENCY SOFTENING RESIN
Gel Type Shallow Shell Technology (SST) resin for softening applications. Lower hardness leakage.
Significant savings in salt usage.
$
SST-60
Softening High Efficiency - 1 Cubic Foot Bag
392.00
$
SST-60-50-BOX
1/2 Cubic Foot Box
217.00
$
SST-60-75-BOX
3/4 Cubic Foot Box
316.00
$
SST-60-100-BOX
1 Cubic Foot Box
424.00
ASM-10-HP - ARSENIC REMOVAL
$
ASM-10-HP
1 Cubic Foot Box
1,631.00
$
ASM-10-HP-50-BOX
1/2 Cubic Foot Box
837.00
$
ASM-10-HP-75-BOX
3/4 Cubic Foot Box
1,245.00
Call Nelsen Toll-Free — OHIO - 800.362.9686, ARIZONA - 866.445.4299, TEXAS - 855.674.0357 or FLORIDA - 866.712.6796
All prices and products subject to change without notice. ©Nelsen Corporation
Resins,
Resins, Media
Media && Chemicals
Chemicals
A520E is a macro porous strong-base anion
resin which is designed for the removal of
nitrates from water for potable processes
for both residential and community water
systems. Regenerated with brine. No
nitrate dumping at the end of service and
longer service runs.
4
Section
74
