2022 Canada COMPREHENSIVE - Flipbook - Page 187
DIMENSIONAL PLASTIC
Standard Mounting Options:
up to 24”
2a-Stud
2b-Pad
2c-Combination
2d-Combination All
Threaded blocks are solvent
bonded to the letter backs to
receive a 10-24 stud. Silicone
adhesive is applied to the studs
and into the drilled holes when
installing. Price as listed including
drill pattern.
Threaded blocks are solvent
bonded to the letter backs to
receive the perforated pad.
Silicone adhesive is used to
adhere the perforated pads to
the installation surface. Spacing
guides are available for this
installation. ** Most letters 9” and
under will have perforated pads
bonded directly to the letter back
and will have a slight stand-off.
Price as listed including stencil
guide.
Threaded blocks are solvent
bonded to the letter backs. The
top portion of the letter receives
stud through pads and the bottom
pad only. Mounting procedure
is the same as 2a Stud with the
addition of securing pads to the
installation surface with silicone.
Drilling pattern is required for this
installation. ** Most letters 9”
and under will have perforated
pads bonded directly to the letter
back and will have a stand-off.
Price as listed including drill
pattern.
Threaded blocks are solvent bonded
to the letter backs. All mount
locations receive a stud through pad.
Mounting procedure is the same as
2a Stud with the addition of securing
pads to the installation surface with
silicone. Price as listed including
drill pattern.
Optional Mounting:
2f-Flange - ADD 5%
Standard mounting In-Line
for rail, brick or block
Letters are produced with a
minimum 1/4” wide visible plastic
flange, all around letter, to allow
for installing with screws (not
supplied). Stud, Combination,
Combination All and Pad mounts
can be added to this mounting at
the +5%. Flange and Flange with
Pad mount includes stencil guide.
Flange with studs, combination
and combination all includes drill
pattern.
Price as Listed
GeminiSignage.ca
185
