Stelrad Vita Series July 2024 - Flipbook - Page 17
Production specification
Installation of radiator
The Stelrad steel panel radiator consists of a grille, two side panels when compacted and individually packed radiator bra
grommets. The brackets and hardware bag contained within the radiator are in the shrink wrap packaging.
(75/65/20ºC)
t50 is the UK’s industry standard for heating outputs, which has an operating temperature of 75/65/20ºC. If you have a low temperature
heat source you may wish to consider t40 or t30 output (see your installer or system designer or download from www.stelrad.com).
For EN442 data, technical and installation information please visit our website: www.stelrad.com and search product downloads.
For systems not operating at DeltaT 50 the correction factors table on page 76 should be applied.
600
WHEN FILLING RADIATOR TURN OFF HEATING AND HOTWATER BOILER CONTROLS, SEALED
SYSTEMS SHOULD BE REPRESSURISED TO THE CORRECT SYSTEM WORKING PRESSURE.
Height
mm
400
22601104
600
22601106
800
22601108
1000
22601110
1200
22601112
1400
22601114
A
65
65
65
65
1x plug
additional bracket
from L >=1800
Type K1, P+, K2
7 7
4357-00
z
E
5463
6554
2241
7646
A
1601
1921
0
D
22602210
22602212
10
14
B
C
83
61
51
Type
K1
65
119
153
185
65
119
153
65
99
269
303
335
65
99
269
303
Type
P+
200
101
77
62
Btu/h
4371
150
3279
4357-00
F
11
961
1281
0
G
11
25
z4357.indd
1
H
A
B
C
D
E
F
G
1
H00
I
22602206
22602208
10
+ 2 wall brackets
(3 for L>=1800)
I
0
10
61
65 51
99
419
453
485
65
99
419
453
25
124
100
73
Type
K2
48
65
99
519
553
585
65
99
519
553
RAD.
83
HEIGHT 300 450 600 700
1781
2375
200
117
124
100
73
133
267
267
position 28
of
rad. le
267
TYPE
radiator length: 1800 to 3000 mm
267
radiator length:
1200 to 1600 mm
267
position of central lug:
rad. length/2
radiator length:
400 to 1100 mm
133
283
13
radiator length:
400 to 1100 m
133
radiator length: 1800 to 3000 mm
283
85
rad.length:
1200 to 1600 mm
radiator
pos. of central lug:
rad.length/2 + 17
283
rad.length:
500 to 1100 mm
rad.length:
400 mm
150
150
117
101
77
62
48
from L >=1800
22602214
640
25
22602204
Heat output
150
4156
Watts
48
Stelrad
UIN
48
85
85
IN STOCK
Btu/h
48
E
2968
3562
1x plug
1218
Plastic grommets
1x air vent
870
1044
- Suffocation: - Keep all packaging materials away from children.
- Ensure that
all packaging
materials are disposed of in a safe and environmentally friendly manner.
additional
bracket
522
1187
85
Packaging:
radiators may be difficult to lift - always test the load for weight and seek assistance when lifting heavy or bulky
loal
radiator
+ 2 wall brackets
Safety:
- For yourType
own K1,
safety
it isK2
recommended that you avoid placing your hands/fingers between and down the back of the
P+,
(3 for L>=1800)
696
Fig. 1
348
48
AUGMENTED
REALITY APP
AVAILABLE
Heat output
z
7 7
Watts
Radiators: - Manual Handling: - Consult your25employer’s manual handling
14risk assessments before manually handling any radiators. Due to their bulk
Potential Hazards / Precautionary Measures
SYSTEMS SHOULD BE REPRESSURISED TO
F THE CORRECT SYSTEM
A WORKING PRESSURE.
Fig. 1
Installation of radiator
rad.length:
D
153 303 453 553
400 mm
E
185 335 485 585
150
150
E
E brackets
Open pack and check contents. (Fig 1). It is recommended
on all radiator types that the wall
F are fitted
65the wide
65 with
65 flange
65 towards the wall. Me
I
D clearanceGis kept 119
mark on fixing wall radiator bracket centres, ensure
a11
minimum dimension of11
a 100-mm
at either99
side of99
finished
radiator
position.
Fro
99
to the bottom edge of the bracket a dimension of
the floor
to the base of radiator for he
H 200 mm should be used. This willCgive a correct
H distance from269
419 519
Fit the plastic grommets in position on radiator brackets. Remove plastic transit plugs from the two radiator- tappings
and
fit air vent and plug to the pref
303 valve
153radiator
453tails553
I Prepare
LH or RH radiator connections, PTFE is not required and care should be taken not to over tighten.
with PTFE tape and fit t
radiator connections. Position radiator to centre of radiator wall brackets, make radiator valve connections, vent from air bleed with heatingrad.length:
system o
500 to 1100 m
radiator with lockshield valve to ensure even heat of all system radiators.
Type
Type
Type
pos. of
NOTE: WHEN FILLING RADIATOR TURN OFF HEATING AND HOTWATER BOILER CONTROLS,
SEALED
P+
K1
K2
G
B
283 rad.len
Stelrad
UIN
85
BAR
Length
mm
K1
85
WORKING
PRESSURE
B
119
99brackets
99 with air vent, plug a
The Stelrad steel panel radiator consists of a grille, two side panels when compacted and individually
packed 99
radiator
C
269 419 519
grommets. The brackets and hardware bag contained within the radiator are in the shrink wrap packaging.
Production specification1x air vent
We recommend that Stelrad steel panel radiators be only used on indirect heating systems.The installation should be in accordance with BS5449 standard. Wh
RAD.quantity of solder and flux and thoroughly
117flushed
117
soldered joints it is important to choose a flux that is readily soluble in water and kept to the minimum
on c
HEIGHT 300 450 600 700
Plastic grommets
- Ensure that all packaging materials are disposed of in a safe and environmentally friendly
- Safety: - For your own safety it is recommended that you avoid placing your hands/fingers between
Stelrad Steel
Panel Radiator Installation Instructions
Packaging:
- Suffocation: - Keep all packaging materials away from children.
radiators may be difficult to lift - always test the load for weight and seek assistance whe
Radiators: - Manual Handling: - Consult your employer’s manual handling risk assessments before manually handling any ra
Potential Hazards / Precautionary Measures
NOTE:
Open pack and check contents. (Fig 1). It is recommended on all radiator types that the wall brackets are fitted with the wide fl
mark on fixing wall radiator bracket centres, ensure a minimum dimension of a 100-mm clearance is kept at either side of finis
to the bottom edge of the bracket a dimension of 200 mm should be used. This will give a correct distance from the floor to
Fit the plastic grommets in position on radiator brackets. Remove plastic transit plugs from the two radiator tappings and fit air
LH or RH radiator connections, PTFE is not required and care should be taken not to over tighten. Prepare radiator valve tail
radiator connections. Position radiator to centre of radiator wall brackets, make radiator valve connections, vent from air ble
radiator with lockshield valve to ensure even heat of all system radiators.
50
Applications
Stelrad Steel Panel Radiator Installation Instructi
We recommend that Stelrad steel panel radiators be only used on indirect heating systems.The installation should be in accordance
soldered joints it is important to choose a flux that is readily soluble in water and kept to the minimum quantity of solder and flux a
Applications
VITA DECO CONCEPT
K2
2184
Anthracite
grey
17