Issue 20 - Flipbook - Page 73
Polyhouses, Covers & Spares
CLADDING SYSTEMS
TENSIONING TOOL
TIMBER MID RAIL PARTS
CODE
J1085
Usually positioned 1m-1.2m (3ft-4ft) above the ground
level on each side, these kits comprise 75mm z 50mm
timbers for clamping the tunnel frame, fixing bolts and
battens for both the roof sheet and the side vent materials.
Mid rail kits are available for both 8ft hoop spacing and
2m hoop spacing. Lengths to suit your requirement.
These require either an aluminium or timber mid rail to fit
the system to the structure. Base rails are not essential but
may be beneficial on certain surfaces as well as improving
appearance. These kits comprise the rails, all fixings
and infills. Please supply details of hoop spacing, hoop
diameter and type of cladding when ordering.
CODE
J1067
J1068
J1069
J1072
J1195
J1196
J1071
J1074
FK6250
DESCRIPTION
Gearbox Assembly c/w wheels
Gearbox unit only
Winding Handle
Side Track 1.8m curved ‘standard’
Side Track 1.8m curved ‘euro’
Side Track 2.4m curved ‘multi cbv’
Drive Spigot for 25mm tube
Clip ‘1’
Steel Roller tube 25mm x 3200mm swaged
ALUMINIUM VALLEY GUTTER
PARTS
DESCRIPTION
Valley Gutter 7215mm
Valley Gutter 2438mm
Gutter Stop End
Gutter Outlet
Gutter Joint Plate
Gutter Joint Seal
Bolt Slot Bung
Replacement parts are available separately. For fixings,
please see our Clamps, Bolts and Fixings section.
CODE
J5666
J5668
J5672
CODE
J1347
J1345
J1349
DESCRIPTION
Single Aluminium Rail 6000mm
Single Aluminium Rail 3000mm
Single Rail Joint Plate
DESCRIPTION
Single Aluminium Rail 6000mm
Single Aluminium Rail 3000mm
Single Rail Joint Plate
ALUMINIUM VALLEY GUTTERS
Replacement parts are available separately. Gutter stop
ends and outlets are handed left and right. To specify
which type you require, stand facing the gutter from the
outside and decide whether the part is on your left hand or
right hand. For fixings, please see our Clamps, Bolts and
Fixings section.
DESCRIPTION
Side Gutter 7315mm
Side Gutter 4876mm
Side Gutter 2438mm
Gutter Outlet – left hand
Gutter Stop End – left hand
Gutter Joint Plate
ALUMINIUM BOX BASE
RAIL PARTS
Usually positioned at ground level, these kits comprise
aluminium extrusions for clamping to the tunnel frame,
fixing bolts and infills. Mid rail kits are available for both
8ft hoop spacing and 2m hoop spacing. Lengths to suit
your requirements.
ALUMINIUM SIDE GUTTER
SPARES
CODE
M1352
M1348
M1349
M1350
M1354
M1360
DESCRIPTION
Corner Clamp 35mm
Corner Clamp 50mm
Corner Clamp 60mm
ALUMINIUM BASE RAIL PARTS
Replacement parts are available separately.
CODE
M1400
M1339
M1380
M1381
M1344
M1332
M1345
CODE
J1791
J1794
J1793
Polyhouses, Covers & Spares
WINDUP SIDE VENT PARTS
73
DESCRIPTION
Tensioning Tool
Aluminium Valley Gutter Kits to suit 21ft span structure
CODE GUTTER KIT SIZE
M3415 19.5m
M3425 36.6m
FRAME STEEL LENGTH
50mm
50mm
Aluminium Valley Gutter Kits to suit 26ft span structure
CODE GUTTER KIT SIZE
M3416 19.5m
M3426 36.6m
FRAME STEEL LENGTH
60mm
60mm
CONTACT US TODAY ON 01270 212726
job29812 JFH Horticultural_Section 5 - Polyhouses, Covers & Spares_PROOF v4.indd 73
02/02/2022 12:28
