Issue 20 - Flipbook - Page 64
Polyhouses, Covers & Spares
POLYHOUSES - FORDINGBRIDGE STRUCTURES
EURO POLYHOUSES
For the customer where side clearance is vital for access or ventilation. Superb design has
allowed the complete range to have identical outer hoop profiles giving manufacturing
economies and reflecting the savings back to the grower. All hoops are completely
vertical for the first 1000mm (3ft 2ins) from ground level. This gives the best possible
clearance for access or for plants. It assists ventilation where side rails set at up to
1200mm (4ft) do not cause rain to drip into the structure. All polyhouses, with the
exception of the 5m span, use 60mm Z35 high tensile steel tube, galvanised inside and
outside for maximum corrosion prevention.
DESIGN
WIDTHS
SPACINGS
TUBE DIAMETER
Euro
5,6,7,8,9 m
2m
60mm (5m Euro 50mm)
Polyhouses, Covers & Spares
STANDARD POLYHOUSES
These are very low cost, yet high quality structure frames using large diameter Z35
tube, all with single ridge and all set on swaged foundation tubes. This arrangement
means the polyhouses are fast to build and have excellent side clearance and
‘shoulder room’. These polyhouses have a lower height profile which can be an
advantage for planning permission purposes.
WIDTHS
SPACINGS
TUBE DIAMETER
Standard
18’,21’, 24’, 28’
8’ (2.4m)
60mm (18’ standard 50mm)
64
DESIGN
THE MULTILINK CBV
The multilink CBV range also has aluminium gutters with grip rail cladding systems.
They have completely vertical sides to gutter height of 8ft (2.44m). Eave gutters are
included on all multilink CBV polyhouses. Crossbraces for crop support are included
as standard. Timber is completely eliminated from the structure with extensive use of
steel and aluminium for side rails and end frames.
DESIGN
WIDTHS
SPACINGS
TUBE DIAMETER
Multilink CBV
21’
8’ (2.4m)
50mm
Multilink CBV
26’
8’ (2.4m)
60mm
VIEW OUR LATEST PRICES AT WWW.JFHHORTICULTURAL.COM
job29812 JFH Horticultural_Section 5 - Polyhouses, Covers & Spares_PROOF v4.indd 64
02/02/2022 12:28
