Full Catalogue 2020/21 - Flipbook - Page 132
5.38
Fibre Optic Cabling
FC Connectors & Adaptors
The FC Connector is used extensively in the telecommunications market, where long singlemode optical fibre cables can run upwards of 50
km. In these extreme situations the connector needs to have extremely low loss and accurate geometry.
The FC Optical Fibre Connector comprises of a nickel plated brass body and a ceramic ferrule/spring/crimp barrel assembly plus a crimp
over sleeve and rubber boot. These connectors are suitable for 900 μm and 2 and 3 mm cables. The connector is precision made and
manufactured to demanding specifications. The combination of a ceramic ferrule and a precision nickel plated brass housing provides
consistent long-term mechanical and optical performance.
Connectors are available in both multimode and singlemode options. One piece design features pre-radiused ceramic ferrules. Suitable for use
with two part heat curing epoxies and cold cure anaerobic adhesives. Generally there are two types of alignment sleeve within an adaptor;
phosphor bronze for multimode or zirconia (ceramic) for singlemode. The FC connector and adaptor set are mainly used for singlemode
applications where precision is required. With its simple to use locking thread mechanism preventing accidental disconnection, this provides a
very secure connection.
Features & Benefits
•
•
•
•
•
•
Low insertion loss and back reflection loss
High precision alignment
NTT-FC Compatibility
Choice of housing shape and sleeve material
Nickel plated brass body
Telcordia, ANSI, TIA/EIA, NTT and JIS compliance
Ordering Information
Product Description
Part Number
FC/APC SX Plug SM 900 um Green Boot
FFFC6
FC SX Plug SM 1.8 mm Red & Blue Boots
FFFC2
FC/PC SX Plug SM 3 mm Blue Boot
FFFC3BL
FC/APC SX Plug SM 3 mm Green Boot
FFFC5
FC SX SM Adaptor - Red Caps
FFFC1
Product Specifications
Product Specifications
FC Connector
Vibration (Mated Pair)
Versions Available
2 mm /3 mm Patch, 900 μm
10-55 Hz, 1.5 mm P to P
=0.3 dB change (IEC 61300-2-1)
Termination
Procedures
Epoxy-crimp-polish
Mating Durability
1000 mating cycles clean every 25
< 0.2 dB change (IEC 61300-2-2)
Standard
packaging
00 pcs bulk packed
High Temperature
75°C for 96 hours
=0.2 dB change (IEC 61300-2-18)
Damp Heat
60°C at 95% RH, 96 hours
=0.2 dB change (IEC 61300-2-19)
Temperature Cycling
-40 to +75°C, 40 cycles
=0.2 dB change (IEC 61300-2-48)
Boot Colours
Blue, black
Singlemode
Insertion Loss
Max. 0.3 dB, typical 0.2 dB
Return Loss
UPC > 50 dB, typical 55 dB
APC > 60 dB, typical 65 dB
Operating Temperature
Multimode
Insertion Loss
Max. 0.3 dB, typical 0.12 dB
(IEC 874-1 method)
Insertion Loss
Mechanical
Capillary Diameter
SM 126 ± 0.5 μm
MM 127 ±0.5 μm ferrule diameter 2.5 mm ± .001
Pre-radiused end finish for PC ferrule
to ferrule. R 10 to 25 mm
-40°C to +85°C
FC Adaptor
Durability
Operating Temperature
