Full Catalogue 2020/21 - Flipbook - Page 130
5.36
Fibre Optic Cabling
SC Connectors & Adaptors
The SC connector is one of the most popular connectors used today. It can be seen in every area of the communications environment, from a
telecoms distribution room to a Local Area Network closet. The SC connector has set the standard for optical fibre connectors. SC connectors
are manufactured using the best quality components and they exceed all areas of the standards covering optical fibre connectors.
The one-piece design features pre-radiused ceramic ferrules, and are suitable for use with two part heat curing epoxies and cold cure
anaerobic adhesives. Available with both 900 um boots for pigtail termination or 3.0 mm crimp ring & boot for patch cord production.
Simplex and duplex versions available (duplex version uses two simplex connectors with a clip to be coupled as required). Generally there are
two types of alignment sleeve within an adaptor; phosphor bronze for multimode or zirconia (ceramic) for singlemode.
Features & Benefits
•
•
•
•
•
•
Low insertion loss and back reflection loss
High precision alignment
Telcordia, ANSI, TIA/EIA, NTT and JIS compliance
Choice of housing material and sleeve material
With or without flange
Compact Design
Ordering Information
Product Description
Part Number
SC SX Plug SM 900 um Blue Body - Blue Boot
FFSC3
SC/APC SX Plug SM 900 um Green Body Green Boot
FFSC6
SC SX Plug SM 2 mm Blue Body - Red Boot
FFSC6RE
SC SX Plug SM 2 mm Blue Body - Blue Boot
FFSC6BL
SC SX Plug SM 3 mm Blue Body - Blue Boot
FFSC2BL
SC/APC SX Plug SM 3 mm Green Body - Green
Boot
SC SX Plug MM 900 um Pigtail Beige Body Beige Boot
FFSC10
FFSC3B
SC SX Plug MM 2 mm Beige Body - Beige Boot
FFSC1
SC DX Plug MM 2 mm Beige Body - Beige Boot
FFSC2
SC SX Plug MM 3 mm Beige Body - Beige Boot
FFSC1BE
SC SX SM Adaptor Blue - Ceramic Sleeve
FFSC15
SC DX SM Adaptor Blue - Ceramic Sleeve
FFSC19
SC SX MM Adaptor Beige - Ceramic Sleeve
FFSC16
SC DX MM Adaptor Aqua - Ceramic Sleeve
FFSC18
SC DX MM Adaptor Beige - Ceramic Sleeve
FFSC20
Product Specifications
Temperature Cycling
-40 to +75°C, 40 cycles =0.2 dB change
(IEC 61300-2-48)
Operating Temperature
-40°C to +85°C
SC Adaptor
Insertion Loss
60 dB, typical 65 dB
Multimode
Insertion loss: max. 0.3 dB, typical 0.12 dB,
(IEC 874-1 method)
Capillary Diameter
Tolerance
SM: 126 ± 0.5 μm, MM: 127 =/- 0.5 μm
Ferrule Diameter
2.5 mm ± .001, Pre-radiused, PC-end finish
for PC ferrule to ferrule. R 10 to 25 mm
Vibration (Mated Pair)
10-55 Hz, 1.5 mm P to P, =0.3 dB change (IEC
61300-2-1)
Mating Durability
000 mating cycles - clean every 25, < 0.2 dB
change (IEC 61300-2-2)
High Temperature
75°C for 96 hours =0.2 dB change (IEC
61300-2-18)
Damp Heat
60°C at 95% RH, 96 hours =0.2 dB change
(IEC 61300-2-19)
T: 01376 346600 E: sales@connectix.co.uk www.connectixcablingsystems.com
©2019 Connectix E&OE
