FibreFox 2019 - Flipbook - Page 5
Fibre Cabling and Solutions
Pre-Terminated Fibre Links
Fibre Cabling and Solutions
Pre-Terminated MTP® Cabling
The OpalTM system allows a fibre optic network to be installed in a fraction of the time taken by conventional on-site
direct termination or fusion splicing. It requires no special installation skills or equipment, and can therefore be installed
by nonspecialist personnel, vastly reducing the installation cost. The system consists of standard internal/external tight
buffered distribution cable, which is supplied in specific lengths for each cable run in an installation. This cable is available in
multimode or singlemode with fibre counts of 4, 8, 12, 16 or 24.
The Connectix Fibre Fox Pre-terminated Plug and Go Fibre System provides the Rapid Fibre Deployment market with an
extremely cost effective, expandable and high speed system. Fibre Fox Plug and Go System utilises MTP® brand preterminated assemblies to ensure optimum performance is achieved when interconnecting pre-terminated Fibre Fox cassettes
and panels.
The cable is factory prepared with a gland on each end which is epoxy bonded onto the Kevlar Strain Relief Yarn in the cable.
The secondary coated fibres are terminated with either ST, SC or LC connectors which are fully tested and certified under our
quality system. This ensures that the quality of the complete cable assembly is guaranteed before shipping to site.
A specially developed termination protection sleeve is fitted to each end of the cable assembly to protect the connectors
during shipping and installation. This sleeve has a small diameter and is flexible, lightweight and extremely rugged. A pulling
eye is incorporated to allow the attachment of a draw cable.
Assemblies are available in 12, 24, 48, & 72 fibres, and micro and ruggedised cable in multimode OM1 62.5/125, OM3 50/125
and singlemode OS2 9/125 options. Fibre Fox Plug and Go System is manufactured in our advanced fibre termination facilities
under stringently controlled laboratory conditions, and is quality controlled to rigorous standards using advanced fibre
interferometer testing equipment.
Features & Benefits
• Quick installation time
• Singlemode & multimode performance
• Ensure optimum interconnect performance
• Up to 72 fibres in one connector
• Interferometer tested
• Quality controlled factory
• Easy to use MTP® brand connector
Features & Benefits
• Quick installation time
• Low installation cost
• Full test documentations supplied
• No special fibre optic skills or equipment required
• Factory terminated and tested
• ST, SC and LC connector options (multi & single mode)
• 4, 8, 12, 16 & 24 fibre configurations
• Standard cables and management enclosures
Ordering Information
Product Description
Part Number
Multimode OM1 62.5/125 (10m)
12 Fibres - OM1 62.5/125 MTP® Assembly
018-010-0100-12
Customer Specified
24 Fibres - OM1 62.5/125 MTP® Assembly
018-010-0100-24
4 to 24
48 Fibres - OM1 62.5/125 MTP® Assembly
018-010-0100-48
ST,SC or LC
72 Fibres - OM1 62.5/125 MTP® Assembly
018-010-0100-71
OpalTM Options
Length
Number of Cores
Connector Types
Fibre Types
Opal
TM
62.5/125, 50/125, 9/125
Recommended Maximum Distances
Multimode OM2 50/125 (10m)
12 Fibres - OM2 50/125 MTP® Assembly
018-015-0100-12
24 Fibres - OM2 50/125 MTP® Assembly
018-015-0100-24
62.5/125
(OM1)
50/125
(OM2)
50/125
(OM3)
50/125
(OM4)
9/125
(OS1)
48 Fibres - OM2 50/125 MTP® Assembly
018-015-0100-48
72 Fibres - OM2 50/125 MTP® Assembly
018-015-0100-72
100 Mbs
2 km
2 km
2 km
2 km
40 km
Multimode OM3 50/125 (10m)
1 Gbs
275 m
550 m
800 m
1100 m
100 km
10 Gbs
33 m
82 m
300 m
550 m
40 km
-
-
100 m
125 m
40 km
40/100 Gbs
12 Fibres - OM3 50/125 MTP® Assembly
018-020-0100-12
24 Fibres - OM3 50/125 MTP® Assembly
018-020-0100-24
48 Fibres - OM3 50/125 MTP® Assembly
018-020-0100-48
72 Fibres - OM3 50/125 MTP® Assembly
018-020-0100-72
Singlemode OS2 9/125 (10m)
1.1
T: 01376 346600 E: sales@connectix.co.uk www.connectixcablingsystems.com
12 Fibres - OS2 9/125 MTP® Assembly
018-030-0100-12
24 Fibres - OS2 9/125 MTP® Assembly
018-030-0100-24
48 Fibres - OS2 9/125 MTP® Assembly
018-030-0100-48
72 Fibres - OS2 9/125 MTP® Assembly
018-030-0100-72
T: 01376 346600 E: sales@connectix.co.uk www.connectixcablingsystems.com
1.2
