FibreFox 2019 - Flipbook - Page 36
Fibre Cabling and Solutions
Foxtails
Fibre Cabling and Solutions
Foxtail - Assembly Procedure
Fibre Fox splice-on connectors provide a convenient low loss alternative to using pigtails to field terminate fibre cable. The
connector is supplied ready terminated with a short length of fibre, which can be directly spliced to installed cable. The splice
is then protected within the specially designed connector boot, removing need for additional splice trays or housings. Used in
conjunction with Fibre Fox Fusion Splicers, the connectors offer a quick to use, high quality, low insertion loss, low return loss,
fully compliant solution.
Features & Benefits
• Compliant with IEX51754-4, KS C6974(F04), JIS C5973(F04)
• Compliant with Telcrdia GR-326-core
• Able to terminate the fibre with a connector in the field
• Jointing point is located inside of the connector
• Higher quality, better insertion loss and return loss
• Easy to assemble with one step system
1. Pass the cable through the boot and
the boot cap.
2. Strip the indoor cable with a
stripper.
3. Clean the stripped cable with an
alcohol soacked tissue.
4. Cleave it with a cleaver.
5. Take the fibre protector off from
the ferrule.
6. Put the ferrule and cable on the
V-groove.
7. Splice.
8. Put the spliced connector in the
oven, then it will start heating
automatically.
9. Get the heated sleeve cooled.
10. Assemble the boot and the cap.
11. Assemble the housing.
12. Completed.
Ordering Information
Product Description
Part Number
Fibre Fox SOC LC PC Connector
FF-SOC-LCPC-XXX
Fibre Fox SOC LC APC Connector
FF-SOC-LCAPC-XXX
Fibre Fox SOC FC PC Connector
FF-SOC-FCPC-XXX
Fibre Fox SOC ST PC Connector
FF-SOC-STPC-XXX
Fibre Fox SOC SC PC Connector
FF-SOC-SCPC-XXX
Fibre Fox SOC SC Connector APC
FF-SOC-SCAPC-XXX
XXX = Type of Fibre: OM1, OM2, OM3, OM4. OS2.
Specifications
Type
Item
SM
Fibre Type
9/125
Insertion
Loss
General
Connector
Return
Loss
UPC
LC
1.33
OM2
OM3
≤ 0.2dB
APC
≤ 0.2dB
UPC
≤ 50dB
-
APC
≤ 60dB
-
Repeating Test
SC
MM
OM1
500 Cycles, ≤0.2dB
Operation Temp
-45C - 85C
Type of Fibre
0.9mm fibre, 2.0mm, 2.4mm, 3.0mm cable, 3X2 indoor cable
Tensile Force
≥30N(≥3.1kgf) for 3.0mm code or 0.9mm fibre / ≥80N(≥8.0kgf) for 3X2 indoor cable
Type of Fibre
2.0mm Code, 3.0mm cable, 3X2 indoor cable
Tensile Force
≥30N(≥3.1KGF) for 2.0mm code/≥50N(5.1kgf) for 3.0mm Cable or 3X2 Indoor Cable
T: 01376 346600 E: sales@connectix.co.uk www.connectixcablingsystems.com
T: 01376 346600 E: sales@connectix.co.uk www.connectixcablingsystems.com
1.34
