Fibre Cabling and SolutionsSC Connectors & AdaptorsFibre Cabling and SolutionsST Connectors & AdaptorsThe SC connector is one of the most popular connectors used today. It can be seen in every area of the communicationsenvironment, from a telecoms distribution room to a Local Area Network closet. The SC connector has set the standard foroptical fibre connectors. SC connectors are manufactured using the best quality components and they exceed all areas of thestandards covering optical fibre connectors.The ST Connector has been the mainstay of optical fibre connectors for many years. It can be found in almost everycommunications room worldwide, but used mainly in data communications systems.The one-piece design features pre-radiused ceramic ferrules, and are suitable for use with two part heat curing epoxies andcold cure anaerobic adhesives. Available with both 900um boots for pigtail termination or 3.0mm crimp ring & boot for patchcord production. Simplex and duplex versions available (duplex version uses two simplex connectors with a clip to be coupledas required). Generally there are two types of alignment sleeve within an adaptor; phosphor bronze for multimode or zirconia(ceramic) for singlemode.The ST optical fibre connector comprises of a nickel plated brass body and a ceramic ferrule/spring/crimp barrel assemblyplus a crimp over sleeve and rubber boot. These connectors are suitable for 900μm and 2-3mm cables. The connector isprecision made and manufactured to demanding specifications.Connectors are suitable for use with two part heat curing epoxies and cold cure anaerobic adhesives. The ST adaptor setthe standard for optical fibre interconnects. With its simple to use bayonet locking mechanism, it preventing accidentaldisconnection. With the precision housing this adaptor gives the very best performance. Generally there are two types ofalignment sleeve within an adaptor; phosphor bronze for multimode or zirconia (ceramic) for singlemode.SpecificationsSpecificationsSC ConnectorVersions AvailableColoursTermination ProcedureStandard Packaging2mm & 3mm boot: blue, red, black,green900μm boot: blueMultimodeInsertion loss: max. 0.3 dB, typical 0.12dB (IEC 874-1 method)SM: 126 ± 0.5μmMM: 127 =/- 0.5μm2.5mm ± .001Ordering InformationProduct DescriptionPart NumberSC SX Plug SM 900um Blue Body - Blue BootFFSC3SC/APC SX Plug SM 900um Green Body- Green BootFFSC6Pre-radiused, PC-end finish for PC ferrule to ferrule. R 10 to 25mmSC SX Plug SM 2mm Blue Body - Red BootFFSC6RE10-55 Hz, 1.5mm P to P=0.3 dB change (IEC 61300-2-1)SC SX Plug SM 2mm Blue Body - Blue BootFFSC6BLSC SX Plug SM 3mm Blue Body - Blue BootFFSC2BLVibration (Mated Pair)Mating Durability1000 mating cycles - clean every 25< 0.2 dB change (IEC 61300-2-2)High Temperature75°C for 96 hours=0.2 dB change (IEC 61300-2-18)Damp Heat60°C at 95% RH, 96 hours=0.2 dB change (IEC 61300-2-19)Temperature Cycling-40 to +75°C, 40 cycles=0.2 dB change (IEC 61300-2-48)Operating Temperature-40°C to +85°CSC AdaptorSC/APC SX Plug SM 3mm Green Body- Green BootFFSC10SC SX Plug MM 900um Pigtail Beige Body- Beige BootFFSC3BSC SX Plug MM 2mm Beige Body - Beige BootFFSC1SC DX Plug MM 2mm Beige Body - Beige BootFFSC2SC SX Plug MM 3mm Beige Body - Beige BootFFSC1BEEpoxy-crimp-polish100pcs bulk packedSinglemodeInsertion loss: max. 0.3 dB, typical0.2 dBReturn loss: UPC > 50 dB, typical 55 dBAPC > 60 dB, typical 65 dBMultimodeInsertion loss: max. 0.3 dB, typical 0.12dB (IEC 874-1 method)Capillary DiameterToleranceFerrule DiameterVibration (Mated Pair)Mating Durability2.5mm ± .00110-55 Hz, 1.5mm P to P=0.3 dB change (IEC 61300-2-1)1000 mating cycles - clean every 25< 0.2 dB change (IEC 61300-2-2)High Temperature75°C for 96 hours=0.2 dB change (IEC 61300-2-18)Damp Heat60°C at 95% RH, 96 hours=0.2 dB change (IEC 61300-2-19)Temperature Cycling-40 to +75°C, 40 cycles=0.2 dB change (IEC 61300-2-48)Operating TemperatureSC SX SM Adaptor Blue - Ceramic SleeveFFSC15ST AdaptorSC DX SM Adaptor Blue - Ceramic SleeveFFSC19Insertion Loss 60 dB, typical 65 dBCapillary DiameterToleranceVersions Available2mm & 3mm patch, 900μm-40°C to +85°CFeatures & Benefits• Low insertion loss and back reflection loss• High precision alignment• Telcordia, ANSI, TIA/EIA, NTT and JIS compliance• Compact design• Choice of housing material and sleeve material• Nickel / plasticOrdering InformationProduct DescriptionFFST2ST SX Plug SM 3mm Clear Cap - Yellow BootFFST10ST SX Plug MM 0.9mm Red Cap - Black Boot
It seems that your browser's pop-up blocker has prevented us from opening a new window/tab. Please click the button below to open the link manually.
