FibreFox 2019 - Flipbook - Page 26
Fibre Cabling and Solutions
XP Fit Plus Field Assembly Connectors
Fibre Cabling and Solutions
LC Connectors & Adaptors
The XP Fit Plus Connectors are a pre-polished, preassembled, non-epoxy fibre connector compatible with standard SC and
LC connectors. Without polishing or adhesives, the XP Fit Plus makes terminating faster and easier, with a typical connection
time of less than two minutes. The XP Fit Plus comes with an assembly jig and fibre holder for 250μm and 900μm tight
buffered fibre, making for an accurate alignment and fibre cleave when terminating.
The LC connectors and adaptors set the standard for small optical fibre interconnects. With its simple to use latched lever
locking mechanism preventing accidental disconnection and precision housing for optimum performance. The LC was also
the first Small Form Factor (SFF) connector set available and offers fibre density and performance unheard of before now.
Following the guides on the assembly jig and fibre holder, the assembly is effortless. Once the fibre is pushed into the
connector and a click is heard, the job is complete and the connector is ready to use in CATV, telecommunication networks,
multimedia, and some FTTX applications.
Features & Benefits
Termination Kit Contents
• Compatible with conventional LC/SC connectors
• Quick assembly in under 2 minutes
• No adhesive or polishing required
• Compact tool without electric power
• Same environmental endurance as
conventional LC/SC connector
• Exceeds TIA/EIA-568-B.3 standards
Jacket and 250um Fibre stripper + 125um buffer remover,
thermal buffer removal tool, replacement blade set, precision
cleave tool, lint free dry wipes, fibre optic cleaning pen, Kevlar
scissors, fibre disposal unit, fine permanent marker pen, fibre
checker, 2.5mm to 1.25mm adaptor - all comes in a light, soft
carry case.
Specifications
Ordering Information
Coating Diameter
Polishing
Insertion Loss
Return Loss
Singlemode
Multimode
250μm and 900μm
900μm
SPC
PC
≤ 0.5 dB (Average 0.2 dB)
≤ 0.3 dB (Average 0.1 dB)
≥ 40 dB
≥ 22 dB
Product Description
1.23
LC connectors are available in both multimode and singlemode and the one-piece design features preradiused ceramic
ferrules. Suitable for use with two part heat curing epoxies and cold cure anaerobic adhesives.
Specifications
LC Connector
Versions Available
Colour
Singlemode
Part Number
XP Fit Plus, LC Connector Singlemode
Blue, 900μm 9/125
004-001-008-45
XP Fit Plus, LC Connector Multimode
Black, 900μm 50/125
004-001-008-50
XP Fit Plus, LC Connector Multimode
Beige, 900μm 62.5/125
004-001-008-51
Multimode
004-001-008-52
XP Fit Plus, SC Connector Singlemode
Blue, 900μm 9/125
004-001-008-40
XP Fit Plus, SC Connector Multimode
Black, 900μm 50/125
004-001-008-36
XP Fit Plus, SC Connector Multimode
Beige, 900μm 62.5/125
004-001-008-35
XP Fit Plus, SC Connector Multimode
Aqua, 900μm 50/125, 10G, OM3
004-001-008-37
LC SX Plug SM Pigtail Blue Body - White Boot
T: 01376 346600 E: sales@connectix.co.uk www.connectixcablingsystems.com
Part Number
FFLC1
LC SX Plug SM 2mm Blue Body - Blue Boot
FFLC2BL
LC SX Plug SM 2mm Blue Body - Red Boot
FFLC2RE
LC DX Plug SM 2mm Blue Body - White Boot
LC DX Plug SM 3mm Blue Body - Blue Boot
00A-011-001-20
Mechanical Capillary
Diameter
Ordering Information
Product Description
XP Fit Plus, LC Connector Multimode
Aqua, 900μm 50/125, 10G, OM3
XP Fit Plus Termination Tool Kit
The LC connector uses a 1.25mm ferrule, half the size of the ST. Otherwise, it is a standard ceramic ferrule connector and its
good performance makes it highly favoured for singlemode terminations.
FFLC9
Ferrule Diameter
FFLC5
LC SX Plug MM 2mm Aqua Body - White Boot
FFLC12
LC DX Plug MM 2mm Aqua Body - White Boot
FFLC6
LC DX Plug MM 3mm Aqua Body – Red & Black
Boots
FFLC11
Singlemode: blue
Multimode: beige
Insertion loss: max. 0.3 dB, typical 0.2 dB
Return loss: UPC > 50 dB, typical 55 dB
APC > 60 dB, typical 65 dB
Insertion loss: max. 0.3 dB, typical 0.12
dB
126 +1/-0μm
1.25mm ± .001
Pre-radiused, PC-end finish for PC ferrule to ferrule. R 10 to 25mm
Vibration (Mated Pair)
Mating Durability
FFLC10
LC SX Plug MM Pigtail Aqua Body - White Boot
2.0 & 3.0mm patch, 900μm simplex &
duplex
High Temperature
10-55 Hz 1.5mm P to P
=0.3 dB change (IEC 61300-2-1)
1000 mating cycles - clean every 25
< 0.2 dB change (IEC 61300-2-2)
75°C for 96 hours
=0.2 dB change (IEC 61300-2-18)
Damp Heat
60°C at 95% RH 96 hours
=0.2 dB change (IEC 61300-2-19)
Temperature Cycling
-40 to +85°C 42 cycles
=0.2 dB change (IEC 61300-2-48)
LC DX SM Adaptor Blue - Ceramic Sleeve
FFLC37
Operating Temperature
LC Quad SM Adaptor Blue - Ceramic Sleeve
FFLC45
LC Adaptor
LC DX MM Adaptor Beige - Ceramic Sleeve
FFLC34
Insertion Loss
LC DX MM Adaptor Aqua - Ceramic Sleeve
FFLC40
Durability
LC Quad MM Adaptor Aqua - Ceramic Sleeve
FFLC49
Operating Temperature
T: 01376 346600 E: sales@connectix.co.uk www.connectixcablingsystems.com
-40°C to +85°C
