LL 2024 23W50 EN mail - Flipbook - Page 64
HYBRID AND ROTARY LASERS
INTERIOR FINISHING WORK, ABOVE AND BELOW
GROUND CONSTRUCTION
Rotary lasers are used accurately convey heights, alignments and slopes over great distances,
even in poor visibility. Laserliner rotary lasers make measuring easier and safer. Their reliability
and accuracy have proved themselves in practical applications, even in very unusual applications.
Laser
635 nm
Rotary lasers with 635nm technology
have a large temperature range in which they
operate reliably. Visibility is limited
to indoor area applications.
Laser
Green looks 6 times brighter than red.
515 nm This makes possible applications on
dark surfaces, over long distances and
working even in very bright ambient light
conditions. A red laser with a wavelength
of 635 nm is used as reference for the
difference in brightness.
Automatic alignment of the device…
…with electronic vials and positioning motors
controlled by temperaturestable sensors for
automaticalignment of devices.
…with a magnetically dampened pendulum system.
The devices are set to their initial position and
align themselves automatically in a matter of seconds.
Prevents erroneous or inaccurate
measurements: Continuous monitoring
of the alignment of the laser is activated
20 or 30/35 seconds after automatic
levelling. Measurements will be suspended
as a precaution if the device is disturbed
unintentionally or moves due to the influence of external factors.
Additional function for all units with
„Sensor Automatic“: The electronic
permanently levels the units even
if these are moving. For quick
levelling, on vibrating surfaces
and windy weather.
2
lock
lock
Laser class
Transport LOCK: Units with “Automatic Level” are
protected with a pendelum lock during transport.
A special motor lock protects units
with “Sensor Automatic”.
IP 66
The measuring tools are
characterised by specific protection
against dust and rain.
Battery system
1.
Powerful technology
64
IP 54
2.
3.
4.
5.
6.
The space grids show the laser planes and functions.
1. Horizontal levelling 3. Slope function
5. 90° angle
2. Vertical levelling
4. Slope function of one axis 6. Reference beam up/
Plumb laser down
auto: Automatic alignment
man: Manual alignment
Additional technical information available at: Phone +49 2932-9004-0 · www.laserliner.com
