Premium DEMO - Flipbook - Page 144
142
Electrical
POWERPOST CABLE CONNECTOR
701 SURFACE OR RECESS MOUNTED
CONTOUR MANUAL BATTERY MASTER SWITCH
Connect high amperage cables securely. Includes insulator
caps. 48 volts DC maximum. Posts have no amperage
rating because amperage flows between terminals stacked
on the post and is determined by the wire and terminals
used.
•
•
•
•
ompact, lightweight
C
Removable key
Countersunk recesses for surface mount application
Standard 2 1/16" (52 mm) hole cut out (same as standard
gauge hole)
• Inside: captive inserts for 3/16" (4.8 mm) nuts providing full
access for cables with no restrictions
• Standard interchange label system
• Molded in high temperature, fiber reinforced plastics
Item#
969-701w
Mount
Surface or Recessed
Volts
6-48
Size
2 3/4" x 23/4" x 3"
Item#
661-2002w
661-2003w
Special
44.99 EA
Item#
661-2018w
Item#
969-701Sw
TERMINAL BLOCK
Size
2 3/4" x 23/4" x 3"
Special
54.99 EA
Special
19.99 EA
19.99 EA
Provides a termination point for extending the length of
outboard harnesses or other conductors.
• Designed for connecting high amperage conductors
• 2018 is also designed for outboard engine installation
when factory cables need to be extended
• One-piece serrated flange nuts ensure correct and secure
connections
• Continuous Rating Not rated-amperage flows between
terminals stacked on post and is determined by wire and
terminals used.
• Voltage Max. Operating: 48V DC
• Mounting Holes Accepts: #10 (M5) Screws
• 2.75''L x 1.75''H
Stud
Special
29.99 EA
1 5/16" & 13/8"-16
4 POSITION - OFF/1/BOTH/2
The 701-S is the most compact selector switch available
on the market. Housed in the same manner as the 701
and includes the same removable side plates and back
cover. While BEP Marine foremost recommends isolated
battery systems as outlined with our distribution clusters,
the 701-S offers a simple economical way of separating
two batteries.
• Rated for 200 amps continuous, 300 intermittent, 1000 cranking
• Panel mount version requires a standard 1 1/16" cut out
Volts
6-48
Size
3.30'' x 1.75''
3.30'' x 1.75''
DUAL POWERPOST CABLE CONNECTOR
701-S MINI BATTERY SELECTOR SWITCH
Mount
Surface or Recessed
Stud
5
/16" x 7/8''
3
/8" x 7/8''
BATTERY MASTER SWITCH
Item#
265-002843011
Repl. Parts
265-706729011
Allows interruption of the main battery cable for effective
protection against unauthorized use of the boat. Positive
or negative cable can be switched off as required. Key
can be removed in "off" position, current interrupted.
Seawater-proof. Tin-plated contacts. U.L. listed. Line
connection: 2 screw terminals, M10. Maximum load
12V: 1000 A (10 sec.) 24V: 500 A (10 sec.).
Black base, red knob.
Size
Type
Special
Battery Master
29.99 EA
2 1/4" dia.
Description
Special
Spare Key
9.99 EA
4 Gang
6 Gang
8 Gang
10 Gang
Corrosion resistant construction. Moisture repellent bakelite insulator base. Nickel
plated brass terminals and #8-32 screws. Protective insulator barrier strips. Rated
for 30A @12V.
Item#
50-13561
50-13571
50-13581
50-13591
Terminal/Fuse Blocks & Buss Bars
Gang
4
6
8
10
Size
4"L x 1 5/16"W x 11/16"H
4 3/8"L x 15/16"W x 11/16"H
5 1/2"L x 15/16"W x 11/16"H
6 5/8"L x 15/16"W x 11/16"H
Special
6.39 EA
8.79 EA
8.49 EA
9.49 EA
TERMINAL BLOCK
BATTERY TERMINAL MOUNT BUSBARS
Tin plated copper bus handles voltage up to 32VDC and is
rated for 100 Amps. #8-32 Screw terminals w/captive star
lock washers ensure a good connection.
Item#
Special
29.99 EA
661-2340w
4-Gang
ST-BLADE BATTERY TERMINAL MOUNT
FUSE BLOCK
Easy to install 4 ATO®/ATC® fused circuits mounts directly
on the battery terminal studs.
• S
crew terminals for securing wires
• Accepts small format labels
• Insulating cover meets ABYC/USCG insulation
requirements
• Ignition Protected -for use in gas engine compartment
• Includes 4 write-on circuit labels
• Includes four 16-14 AWG and four 12-10 AWG Nylon
insulated ring terminals
• Fuses sold separately
• includes a 4-circuit negative busbar
Item#
661-5024w
u-
Description
ATO / ATC Fuse Block Kit
WARNING Cancer Causing v -
10_B-Electrical_SV_2.indd 142
Amps
30
DUALBUS 100 AMP COMMON BUSBAR
2702
2701
Item#
661-2701w
661-2702w
Special
44.99 EA
WARNING Reproductive Harm
6-Gang
A closed back design completely insulates power from the mounting surface. Each
screw pair is one isolated circuit. Optional jumpers allow creation of common
circuits. Tin-Plated Brass.
Item#
Gang
Amps
Fastener
Special
4
20
#6
5.99 EA
661-2404w
6
20
#6
8.99 EA
661-2406w
4
30
#8
8.99 EA
661-2504w
6
30
#8
9.99 EA
661-2506w
w-
Gang
5
10
Combine negative and positive
buses on one block. Features tinplated copper bus and stainless
steel hardware. Continuous
amperage of 100 amps.
Maximum 48V DC / 300V AC.
Terminal Screw
#8-32
#8-32
WARNING Cancer and Reproductive Harm
Special
29.99 EA
34.99 EA
See www.P65Warnings.ca.gov
11/11/2022 12:32:01 PM