2024 SeaValue Premium - Flipbook - Page 235
Steering and Controls
233
Engine Controls
TWIN LEVER, SINGLE STATION CONTROL
HOT FOOT™ FOOT THROTTLE
Improves throttle control for outboards and inboards. A
stainless steel spring returns engine to idle position when
released. Uses standard control cables for easy hook-up.
Made of chrome plated brass. Each separate lever controls
clutch and throttle for one engine. Functions easily identified by
red and black knobs. Designed to use 33C type control cables.
Shims and cable clamps are made of brass and are supplied for
easy installation. Overall height 85/16"
Base: 45/16" W x 57/16" L x 3" H
Not for dual station applications.
Item#
50-28401c
Description
Twin Lever Control
Fastener
# 10 screws
Special
280.99 EA
• Optional Slide Mount (HFM1DP): Allows for 5" of easy adjustment of throttle
position to accommodate different drivers.
Item#
Description
Special
232-HF1DPc
Universal
244.99 EA
Power Steering
SEASTAR POWER ASSIST
XTREME POWER ASSIST
Install on new SeaStar steering or to retro-fit to existing
systems. Suitable for most boat types, it uses an electronically
controlled hydraulic pump for on-demand power steering. It
installs between the helm and steering cylinder and adjusts
automatically to 12V or 24V. Dramatically reduces steering
effort. Wall or Floor Mount. Compatible with power purge
system. Return to manual in failure mode. Suitable for use
with autopilots. Wiring harness included. Ignition protected
(SAE J-1171). ABYC, CE, NMMA, ISO 10592 Approved.
• 12/24 Volts (automatically recognized)
• 1000psi MAX system peak pressure (500psi working load)
• Relief pressure 2000 psi
• MAX current draw = 50 amps
• Typical current draw = ~3 amps
• Purple ignition wire MAX current draw = 1 amp
Item#
1-PA12002
Description
Standard Power Assist, 15' Harness
Special
2699.99 EA
Bring the smooth, easy control of electric
power-assisted steering to a wide range of
popular boats, including pontoons, runabouts,
RIBS, aluminum fishing boats and center
consoles. This is an affordable, easy-to-install
solution that offers a more enjoyable driving
experience. 12' Wire harness included.
• Significantly reduced steering effort
provides a car-like driving experience
for mechanically steered boats
• Engineered to fit a wide range of single
engine, mechanically steered outboard
boats from 90-200HP
• Built in Fail-Safe System automatically
reverts to mechanical steering in the
event of a system failure
• Integrates with any existing SeaStar
rack or rotary steering system
• no need to install new steering to take
advantage of this new technology
• A self-contained, plug-and-play system
which easily mounts to all major
outboard brands and integrates with the
boat’s existing mechanical steering in
less than 30 minutes
Item#
1-XPA1012Pc
Special
2029.99 EA
Power Steering
PROTECH FRONT MOUNT HYDRAULIC STEERING CYLINDER
Compatible with competing helms, hoses and oil, the UC128 cylinder is built to last with heavy duty stainless steel cylinder rod, seals
and link assemblies. Constructed of top grade materials, this cylinder is simple to install and fits almost every two and four stroke
outboard engine in the market.
See engine application chart for more information.
Item#
216-UC128TS1c
216-UC128TS2c
Description
Standard w/Straight Arm
Standard w/Offset Arm
Volume
7.3ci
7.3ci
Length: Stroke
7.28"
7.28"
Bore Size
1.37"
1.37"
Special
829.99 EA
829.99 EA
Dometic Hydraulic Steering
BAYSTAR COMPACT HYDRAULIC STEERING SYSTEM
Application: BayStar is for single-outboard powered boats rated up to 150 HP, including runabouts and inflatables and outboard
engines with ABYC standard engine tilt tubes up to 150 HP (total). For single station, single engine use only. BayStar is not
intended for high speed, high performance type boats.
Helm and cylinder equipped with adjustable O-ring fittings to simplify the installation process and allow for simple
reorientation of the fittings after installation. Two year warranty.
• Requires 5" H x 6" D x 21" W minimum splashwell
• 5 Turns lock-to-lock
• Balanced cylinder fits most splashwells
• 5" footprint
• needs only 3" hole (Standard or Tilt)
• Complete with helm, cylinder, fittings, tubing, oil, fill kit &
instructions
Item#
1-HK4200A3
KEY: Blue Item # =NEW
|
Red Item # =HAZARDOUS
| vOversize |
Includes
HH43143 Std Helm w/20' Tubing
• Standard 3/4" tapered shaft
• Meets A.B.Y.C. standards and meets NMMA certification
requirementsKits Includes:BayStar Helm 1.4 cu with
adjustable O-ring fittings
• HC4645H3 - BayStar Compact Cylinder
• HA5430 (2) - Hydraulic Oil (1 liter)
• HT4420H - (2) 20' hoses (on select kits)
Special
999.99 EA
To Our Valued Customers: Prices are subject to change without notice
