2024 SeaValue Canada Premium - Catalog - Page 212
210
Engine
BETTER THAN THE
OEM PROPELLER
*Note: To find the correct installation kit and propeller housing, locate the HP, gearcase size, and prop shaft spline count of your outboard or sterndrive.
AN INSTALLATION KIT IS REQUIRED
FOR PROPS LISTED TO THE RIGHT
MasterGuard 500 Series Kits
Include a Lifetime Warranty
40 -150hp
ENGINES WITH A
4.25" GEARCASE
500 Series Installation Kits
Use on engines under 200hp with
aluminum or stainless steel props or
most engines 200hp and above
with aluminum props only.
Premium corrosion resistant brass splines.
Eliminate hub system vibration & chatter.
Reduce gear shock & engine/drive damage.
Reduce prop replacement cost by up to 33%.
800 Series Installation Kits
For noisy lower units - quieter ride
Use on engines 40hp and above
with stainless steel props.
Includes a limited 1 year warranty.
500 MasterGuard & 800 MasterTorq
Series Installation Kits & Corresponding
Prop Housings are Compatible with,
and Upgrade Competitors’ Hub & Prop
Systems. Interchangeable with Mercury®
Flo-Torq II®, Michigan Wheel® XHS®,
Solas® Rubex™ hub kit systems. NOTE: Not
applicable with Turning Point’s 10, 20 and
200 Hub Kit series.
Engine Brand - Various Splined Prop Shafts
Kit
MFG. Part #
LNS Part #
503
11500300
708-11500300
506
501
501
11500600
11500100
11500100
708-11500600
708-11500100
708-11500100
507
11500700
708-11500700
501
11500100
708-11500100
801F
11800100
708-11800100
505
11500500
708-11500500
507
11500700
708-11500700
503
11500300
708-11500300
500
11500000
708-11500000
506
11500600
708-11500600
509
11500900
708-11500900
501
11500100
708-11500100
500
11500000
708-11500000
800F
11800000
708-11800000
505
11500500
708-11500500
805F
11800500
708-11800500
EVINRUDE® & JOHNSON®: (13 spline shaft)
2 cyl: 50hp ('71-'74) / 45 to 55hp commercial
3 cyl: 55, 60, 65, 70hp, 75hp with large gearcase, 65hp commercial
4 cyl: 75, 85, 88, 90, 100, 110, 115, 120 ('86-'94), 125, 135 ('73-'76), 140 ('77-'84,
'86-'94) / H.O. (includes E-TEC H.O.): 60, 90, 115hp
E-TEC: 40, 50, 60, 65, 75hp /
20” shaft: 90, 115hp (not pontoon series), 130hp ('09-'10) /
E-TEC G2 Series only 3cyl with small gearcase: 115H.O, 140, 150hp
JOHNSON®: (13 spline shaft) 4 stroke ('98-'09): 60hp, 70hp
FORCE®: (15 spline shaft) 75hp ('99) / 90hp to 150hp ('95+)
HONDA®: (15 spline shaft) ('95-'98): 75hp, 90hp
HONDA®: (15 spline shaft) P60 / 75, 90 (‘99+) / 100,
115 (not 115D), 130hp
MERCURY & MARINER :
®
®
Note1: Use 801F kit on noisy lower units with stainless steel propellers.
Note2: Props Not Available for '77 & Older models. (15 spline shaft) (2 & 4 stroke)
40 to 60 CT, Bigfoot, FourStroke / 70 (‘87-’89) / 75, 80 (‘78-’89), 90, 100, 115,
125, 140hp / 150 XR4/6 (thru 1993, includes equivalent Mariner Magnum I, II, III.)
FourStroke™ & SeaPro™ 4cyl: 40 to 75hp / OptiMax: 75, 90, 115, 125hp
NISSAN® & TOHATSU®: (15 spline) 60C, 70C, 70('02-'09) /
MFS('21+) 75 to 140hp / (not BFT): 90 to 140hp / 115 TLDI ('14+)
NISSAN® & TOHATSU®: (15 spline shaft) BFT ('14-'20): W60, 60, 75, 90hp
OMC®: (13 spline shaft)
Cobra 400: 2.3 to 3.0L ('78-'89) / Sea Drive: 1.6 to 1.8L
PARSUN®: (15 spline shaft) T60, T75, T85, T90
SUZUKI®: (13 spline shaft)
DT 2 Stroke ('89+): 75 to 140hp /
DF 4 Stroke ('98-'09): 60hp, 70hp
SUZUKI® & JOHNSON®: (use 4 blade props only)
4 stroke: (‘09+) 70A, 80A, 90A, 70, 80 / (‘01+) 90, 100, 115 (Not 115A)
SUZUKI® & JOHNSON®: (use 4 blade props only)
DF 4 stroke: 50AV, 60AV, 115A, 140, 140A
YAMAHA®: (15 spline shaft)
Note1: Use 800F kit on noisy lower units with stainless steel propellers.
Note2: If prop strikes trim tab, replace with Yamaha part #6E5-45371-10.
High Thrust: FT50, FT60 / 2 stroke: 60 to 100hp / 4 stroke: 70, 75 ('03-'16),
80, 90 ('03-'16), 100hp (‘03-’16)
YAMAHA®: (15 spline shaft)
Note1: Use 805F kit on noisy lower units with stainless steel propellers.
Note2: If prop strikes trim tab, replace with Yamaha part #6E5-45371-10.
2 stroke: 115 to 130hp / 4 stroke: 75 ('17+), 90 ('17+), 100 (‘17+),115hp
new engineering CRANKs up BOAT PERFORMANCE
Stainless Steel Performance at Aluminum Prices
New unique blade geometry and manufacturing processes results in the highest performance
aluminum propellers on the block. Hustler® propellers out performed most competitive stainless
steel props in recent tests. Not only does top speed, handling and hole shot improve, but also midrange performance, which will save you a ton in gas usage.
Squeeze Cast for Added Strength
Stainless steel performance is built into the Hustler Aluminum prop line. This is achieved through
unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting.
It generates the highest mechanical properties attainable in a cast aluminum prop resulting from
a tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors still use old
Die-Cast processes that produce blades that flex, resulting in overall poor performance.
TP-5
WARNING: MasterGuard & MasterTorq Installation Kits Warning: This product can expose you to chemicals including lead and lead compounds, which are
known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
