2024 SeaValue Canada Premium - Catalog - Page 124
122
Plumbing and Ventilation
SUBMERSIBLE BILGE PUMPS
Our pumps are tested to the highest standard, resulting in
higher flow with better efficiency.
• Higher Flow optimized impeller to provide greater flow at
the same amperage
• Built-in Thermal Cut-Off (TCO)
• Back Flow Prevention reduces the amount of water left
over in the bilge
• Hidden Air Vents in the Body helps prevent air locking
• Threaded Discharge for easier installation & maintenance
Item#
29-24DA
29-25DA
29-20DA
29-27DA
Volts
12
12
12
12
GPH Hose
360 3/4"
500 3/4"
800 3/4"
1100 1" & 11/8"
Amps
2.1
1.6
3.4
3.7
43.99 EA
57.99 EA
91.99 EA
103.99 EA
RuleMate Automatic
Bilge Pump
NEW
LOPRO™ BILGE PUMP
Pump is only 21/4" high. Includes a straight & 90°
fitting. Includes a tricuspid check valve for the
straight fitting to minimize back flow. The entire
discharge body swivels up to 180° for ease of
installation. The hose can also swivel 360°.
LP900S has two automated settings to turn on when the
water reaches either 1" or 13/4". The electronic automatic
mode allows the pump to check for water every 21/2 minutes.
If water is detected, the pump stays on until no water is
detected, then the pump turns off.
Item#
29-LP900S
Volts Description
12
Fully automatic pump
GPH Amps
900 4
RULE-MATE™ AUTOMATIC BILGE PUMP
The eco-friendly Rule Mate pumps feature a solid state
water sensing technology to eliminate a separate float
switch. The sensor's unique "field effect" technology is
eco-friendly because straight motor oil in the bilge will not
turn on the pump. Includes a straight hose fitting, a snapon strainer for easy cleaning and an anti-fouling impeller.
3-Year limited warranty.
Back View
Item#
29-RM500B
29-RM800B
29-RM1100B
Volts
12
12
12
GPH Hose Amps
500 3/4"
1.8
800 3/4"
3
1
1100 1 /8" 3.8
133.99 EA
183.99 EA
235.99 EA
The Next Generation of RuleMate
Bilge Pumps
•
•
•
•
Automatic water level sensing
500, 800, 1100 GPH (10% higher 昀氀ow)
All models supplied with back 昀氀ow prevention
Built in thermal cut out to protect pump
and vessel
• Anti-airlock protection
• RuleMate models feature a safety back-up
operating mode
Item#
GPH
Hose
Volts
Fuse Size
29-RM500B
500
3/4”
12
4A
ROUND AUTOMATIC BILGE PUMPS
29-RM800B
800
3/4”
12
5A
Ignition protected, submersible, double insulated motor
runs cooler and can run dry. Double strainer non-clogging
protection. Compact, efficient and maintenance free.
Moisture tight PTFE seals. Silent running, vibrationless
w/anti-airlock feature. Heat resistant housing with a 5/16"
stainless shaft and a nylon/fiberglass impeller.
29-RM1100B
1100
1” & 1 1/8”
12
7.5A
Item#
29-25SA
29-27SA
Volts GPH Hose
12
500 3/4"
12
1100 1" & 11/8"
Amps
1.9
3.3
163.99 EA
248.99 EA
Visit our website
xylem.com/rule
© 2019 Xylem Inc. Rule is a trademark of Xylem, Inc. or one of its subsidiaries.
