PIP Consumables Catalogue JULY 2024 ED1 DIGITAL V3 - Flipbook - Page 206
PRO CHOICE SAFETY GEAR
COLD PROTECTION
STANDARDS
EN511 - Protection from Cold Standards
This Standard applies to any gloves that protect the hands against convective and contact cold down to
350 °C. Three efects are measured with the glove:
Resistance to convective cold - based on the thermal insulation properties of the glove which are
obtained by measuring the transfer of cold via convection.
Resistance to contact cold - based on the thermal resistance of the glove material when exposed to contact with a cold object.
The last digit next to the pictogram shows if water penetrates the glove after 30 minutes. The pictogram will be accompanied by
a 3-digit code.
" The orst digit show resistance to convective cold (performance level 0-4)
" The second digit show resistance to contact cold (performance level 0-4) The higher performance level the better
insulating capacity.
" The third digit show permeability to water (performance level 0 or 1) 0 = water penetration after 30 minutes 1 = no
water penetration after 30 minutes.
PERFORMANCE LEVEL GUIDE
PERFORMANCE LEVEL
0
1
2
3
4
THERMAL INSULATION ITR IN M2. OC/W
LESS THAN 0.30
0.10 TO 0.15
0.15 TO 0.22
0.22 TO 0.30
GREATER THAN
0.30
RESISTANCE TO CONTACT COLD
LESS THAN
0.025
0.025 TO 0.050
0.050 TO 0.100
0.100 TO 0.150
GREATER THAN
0.150
FAIL
PASS
N/A
N/A
N/A
RESISTANCE TO CONVECTIVE COLD
THERMAL RESISTANCE R IN M2. OC/W
PERMEABILITY TO WATER
HAND PROTECTION
(WATER TIGHT TEST)
206
NPFF(SIZE)
PVC
STINGA FROST - BLACK PVC FOAM ON NYLON WINTER LINER
• Seamless 15 gauge, 100% apparel grade nylon shell.
• Fleece lining for cold environment work
• Water repellent PVC foam coating provides enhanced grip in wet and dry conditions.
• Highest grade nylon for optimum control and latex free for allergies.
SIZES: 7-11 / QTY/PACK: 12 PAIRS / QTY/CARTON: 120 PAIRS
EN 388:2016
EN 511:2005
4130X
020
AS/NZS 2161.3:2005
BMP No. 668611
PROCHOICESAFETYGEAR.COM
