UPDATED A5 Panasonic technical handbook F 2025 - Flipbook - Page 99
PACi NX Ð Setup Low Temperature
The last step is to auto-address the system . This may take
3. Change code no. to A1 and press enter.
several minutes, but when complete Ð the system should run
as normal.
4. Change or leave as is your O/d unit no. to your desired
1.Press the 3 buttons below again to go into the maintenance function.
system address and press enter
2.Scroll down to Auto address and press enter.
Once the system has self-addressed the remote
screen will return to normalReady to be switched on.
99