UK VRF GEN 24 - Flipbook - Page 82
GENERAL INDEX
4 way 90x90 cassette with
nanoe X Generator Mark 3
Large capacity VRF. Trusted power and high efficiency.
These Cassettes offer upgraded nanoe™ X technology and Econavi as
accessories for making application space more comfortable and efficient.
Thanks to advances in design and technology such as the
high performance turbo fan which is more efficient and
silent, nanoe™ X technology, and the floor temperature
and humidity sensor (Econavi) for more control, the
Panasonic U2 type 4 way 90x90 cassette offers greater
comfort.
The nanoe™ X performance varies depending on the room size, environment and usage and it may
take several hours to reach the full effect. nanoe™ X is not medical device, local regulations on
building design and sanitary recommendations must be followed.
Always fresh and clean air with nanoe™ X
The 4 way 90x90 cassette with nanoe™ X, when tested, has
shown to inhibit hazardous substances by 92%, when
compared to natural reduction*.
In addition to the 7 effects of nanoe™ X, the indoor unit
can also be cleaned with a short operation of nanoe™ X +
dry mode.
After cooling/drying operation, the inside of the indoor
unit is automatically dried and nanoe™ X is activated to
suppress mould growth.
* Controllers (CZ-RTC5B or CZ-RTC6/BL/BLW) are required.
Operates the fan to discharge internal humidity.
Optional Econavi intelligent sensor
Human activity sensor and floor temperature sensor can
reduce waste energy, by optimising air conditioner
operation.
Operate the fan to circulate nanoe™ X
internally.
Advanced Econavi functions.
2 sensors (movement and floor
temperature) can provide a reduction in wasted energy by
means of effective control. The floor temperature can be
detected with a ceiling height of up to 5 m.
Econavi exclusive panel. Optional (CZ-KPU3AW)
Area detected by
movemet sensor
Floor temperature
sensor.
This sensor detects
average floor
temperature and
operates circulation if
floor temperature is low.
Max.
5,0 m
Area detected by
floor temperature
sensor
1,0m
Movement sensor.
This sensor detects the amount of human
activity, and operates effectively.
Humidity sensor.
A humidity sensor positioned in the air inlet provides
comfort and saves energy based on temperature and
humidity.
Group control, circulation function.
Circulating operation is activated when a room is
unoccupied to evenly distribute air and minimize thermal
stratification in both heating and cooling operation.
High
Low
High
Low
Wired remote controller
CZ-RTC5B or CZ-RTC6/
BL is required.
82
Normal operation
Lower set temperature in
heating when humidity is
high
Higher set temperature in
cooling when humidity is
low
Circulation by detecting no movement
(10 minutes).
Indirect air flow by detecting movement.