UK VRF GEN 24 - Flipbook - Page 52
GENERAL INDEX
3-Pipe ECOi EX MF3 Series
Simultaneous heating and cooling VRF system.
The Panasonic 3-Pipe ECOi EX MF3 Series offers the best solution
for the most discerning customers and demanding installations.
Simultaneous heating and cooling VRF System
The Panasonic 3-Pipe ECOi EX MF3 Series offers the ideal solution to meet customer's demands.
Upgraded energy efficiency utilized ECOi EX technology.
· SEER / SCOP improved in full capacities from 8 to 16 HP
· SEER / SCOP follows LOT21 (January 2018)
· Eurovent certified EER / COP
Excellent seasonal energy saving.
Design flexibility.
· High reliability even under extreme temperature
conditions
· Connection of up to 52 indoor units
· Slim heat recovery box with just 200 mm height
· Farthest piping length between indoor and outdoor units:
200 m
6,00
SEER / SCOP
8,00
7,00
7,05
7,02
6,69
6,39
6,02
5,00
4,85
4,00
4,27
4,25
4,13
3,81
3,00
2,00
1,00
0
8 HP
10 HP
12 HP
14 HP
16 HP
8 HP
10 HP
12 HP
14 HP
SEER
Extended design operation conditions
Cooling design operation conditions: The cooling operating
range has been extended to -10 °C ~ 52 °C by changing
the outdoor fan to an Inverter type.
Heating design operation conditions: Stable heating
operation even with an outside air temperature of -20 °C.
The heating operating range has been extended to -20 °C
by use of a compressor with a high-pressure vessel.
52 °C
-10
-5
0
5
10
15
20
25
-20 °C
-25
Wide temperature setting range
Wired remote controller heating temperature setting
range is 16 to 30 °C as standard.
SCOP
Cooling design operation conditions.
-15
-20
16 HP
30
35
40
45
50
55
Heating design operation conditions.
-15
-10
-5
0
5
10
15
20
Cooling: Outside air temperature ˚C (DB). Heating: Outside air temperature ˚C ( WB).
Increased maximum number of connectable indoor units
Maximum 48 HP with 52 indoor units can be set up according to user needs.
Connectable indoor / outdoor unit capacity ratio up to 150%.
System ( HP)
8
10
12
14
16
18
20
Connectable indoor units*: 150%
19
24
29
34
39
43
48
22
24
26
28
30
32
34
36
52
38
40
42
44
46
48
52
*Depending on indoor units types. Please check service manuals.
Power suppression control for energy saving (demand control) 1)
The 3-Pipe ECOi EX MF3 Series has a built-in demand function which uses the Inverter characteristics. With this demand
function, the power consumption can be set in three steps, and operation 2) at optimum performance is performed
according to the setting and the power consumption. This function is useful to reduce the annual power consumption and
to save electricity costs while maintaining comfort.
1) An outdoor Seri-Para I/O unit is required for demand input.
2) Setting is possible as 0% or in the range from 40 to 100% (in steps of 5%). At the time of shipping, setting has been done to the three steps of 0%, 70%, and 100%.
52
