Lighting By Design No.8 - Flipbook - Page 306
Using the catalogue
Now that tungsten lamps have been
discontinued,
we
have
listed
the
majority of products in this catalogue with a
lamp base and maximum LED wattage. The
exceptions to this are G9 and low
voltage
lamps
ttings
which
are
still available as a halogen option.
Our ‘suitable for low ceilings’ logo can be
found throughout the
catalogue and denotes that
the tting is 36cm or less in
height.
All luminaires are supplied for normal
use. Any extraordinary usage or situation
should be advised prior to placing an order.
As always, customer satisfaction and safety
are our main priorities and all our ttings
are subject to stringent quality controls.
Each item is individually tested to ensure
compliance with the latest requirements
and all safety procedures are regularly
reviewed and improved. The maximum
safe wattage and lamp type are listed
for every product within this catalogue.
LED Lifetime
Emergency Lighting
All our dedicated LED products are manufactured using the most
suitable components for the application for which they are
intended and are built for longevity vastly reducing the need for
lamp maintenance in domestic and commercial applications.
For full details of LED warranties, see your supplier.
Various luminaires can be supplied with integral 3 hour maintained
emergency gear. The appropriate model numbers are shown with
next
to the standard code. Other units may be supplied with remote emergency
gear where required provided the tting is suitable.
Lighting on flammable surfaces
Dimensions
All dimensions are approximate and, as part of our policy of
continual improvement, we reserve the right to make modications
at any time.
Diameter (Ø): Overall diameter including glassware or lampshade as
illustrated (except where stated ‘not including shades’).
Height:
The overall measurement from top to bottom where a product
is not adjustable.
Min. Height: The overall measurement from the top of the ceiling xing to
the lowest point of the tting including the minimum amount
of chain or cable.
NB: Fittings are supplied to accommodate the maximum
height and can be shortened on site prior to installation.
They should not be shortened to less than the given minimum
height as installation of certain ttings too close to a surface
can cause discolouration of the surface nish.
Max. Height: The overall measurement from the top of the ceiling xing,
including the maximum amount of chain or cable, to the
lowest point of the tting.
Projection: Overall projection of a bracket including glassware or shade
as illustrated (except where stated ‘not including shades’).
Width:
Overall width including glassware or shade as illustrated
(except where stated ‘not including shades’).
All light ttings develop heat when working, some more than others. Light
ttings are marked according to their suitability for different mounting
surfaces.
Under BS EN60598-1:2015 the following symbols are used when luminaires
are not suitable for mounting in certain applications:
Not suitable for covering with thermal insulation
Not suitable for mounting in a normally ammable surface
Not suitable for mounting on a normally ammable surface
Symbols explained
Double insulated tting (requires no earth connection)
LED options available
Emergency options available
Dimmable options available
Integral lighting control options available
Fittings are manufactured in brass with the
exception of the chain which, for strength, is
made of steel.
If you require further information, please contact your supplier.
304