EN katalógus általános Kolver 2022 - Flipbook - Page 51
Control Units / Accessories
Accessories for EDU2AE series controllers (PLUTO Screwdrivers)
Code
Model
Description
Program selection – To be used with EDU2AE/TOP, EDU2AE/TOP/E or EDU2AE/TOP/TA (multiprogram controllers).
020033
SWBX88 Switchbox
Select the right pre-set program by simply pushing a button. 8-program selection.
020042
CBS880 Socket tray
When a bit or socket is removed from the tray, the control unit automatically selects the pre-set program. 8-program selection.
020050
BRCR90 Barcode reader
Multiprogram units can also be controlled via a barcode scanner. Scan the right barcode to select the correct pre-set program.
Dual output connector
020045
DOCK 04
020045/TA
DOCK 04/TA
Dual output connector for PLUTO Series, to be used with EDU2AE/TOP. Run two drivers with one controller (not simultaneously).
Dual output connector for PLUTO TA Series, to be used with EDU2AE/TOP/TA. Run two drivers with one controller (not simultaneously).
Remote start and reverse
020070
Start / Reverse pedals
Start and reverse signals can be activated using a foot pedal. Supplied standard with 3.5 m cable and connector for any EDU2AE controller.
PRNTR1 Serial printer
Instantly print each screw tightening result via a serial printer. It connects directly to multiprogram units and K and Mini K/S torque testers.
Data printer
020026
Computer connection
020075
Ethernet device
Connect your PC to any EDU2AE/TOP, EDU2AE/TOP/E or EDU2AE/TOP/TA via remote LAN connection using an ethernet device.
Visual signals
020080
Light tower stack
A light stack makes output signals clearly visible. Supplied standard with 2.5 cable and 10 pin connector for EDU2AE series.
Accessories for EDU1FR series controllers (FAB & RAF Screwdrivers)
Code
Model
Description
Dual output connector
020020
DOCK 01
Dual output connector for EDU1FR controllers. Run two drivers with one controller. Drivers cannot be used at the same time.
Screw counting device
020021
ACE
Screw counting device for EDU1FR/SG controller. It keeps track of either correct and wrong tightenings, as well as cycles and sequences.
Accessories for EDU1BL series controllers (KBL Screwdrivers)
Code
Model
Description
Dual output connector
020035
020035/S
DOCK 02
DOCK 02/S
Dual output connector for EDU1BL controllers. Run two drivers with one controller. Both drivers can be used at the same time.
Dual output connector for EDU1BL/SG controllers. Run two drivers with one controller. Both drivers can be used at the same time.
Screw counting device
020022
ACE
Screw counting device for EDU1BL/SG controller. It keeps track of either correct and wrong tightenings, as well as cycles and sequences.
Control Units
51
