Combined-languages-d1 - Flipbook - Page 55
USER'S MANUAL
55 � EN
EVOLUTION VETERINARY DENTAL UNITS
HANDPIECE MAINTENANCE
Lubrication of HS & LS Handpieces
Refer to separate handpiece manual
All handpieces should be lubricated regularly. We
recommend the use of iM3 MD-30 handpiece oil before
use and after 30 minutes of running time. The foot pedal
should be depressed for 30 seconds after oiling to ensure
the lubricant will reach the turbines and working portions
of the handpiece.
Don’t forget to depress the foot control after
oiling to ensure lubricant reaches the turbines
Fig.47 - lubrication of Handpieces
All Handpieces have a working life which can be extended
by maintaining the correct operating pressures and speeds
as well as adequate lubrication.
The working life of most Handpieces turbines is
12-24 months, however, this will depend upon the degree
of care taken and the amount of use.
Preventative maintenance will ensure a working Handpiece
at all times.
HANDPIECE
DAILY
WEEKLY
MONTHLY
YEARLY
iM3 Low Speed
Handpiece Oil in
smaller of 2 big holes.
Depress the foot
pedal for 10 seconds
to ensure the oil
reaches the Turbine
Oil AM or PM before
or after use. 2-3
drops Use iM3 MD-30
Lubricant.
Replace turbine and
‘o’ rings and sealing
gasket. If worn
iM3 High Speed
Handpiece as per the
instructions for the
Low speed above.
Oil AM or PM before
or after use. 2-3
drops Oil with MD-30
Lubricant.
Replace turbine and
‘o’ rings and sealing
gasket. If worn
Prophy Head R&R
Oscillating
Dispose of prophy
head between
patients to prevent
cross contamination
