Combined-languages-d1 - Flipbook - Page 20
USER'S MANUAL
EVOLUTION VETERINARY DENTAL UNITS
20 � EN
OPERATION - ENDODONTICS SETTINGS
Step 1: Press the Endo key to switch between
Restoration & Prosthetics operation,
and Endodontics operation.
Endo key Flashes: »!«, » turn off «,
appear on the display.
Step 2: Switch off Coolant supply at the
dental unit.
Step 3: Press program key [P] to select
programs [1 – 5].
OPERATION - GENERAL SET-UP MENU
You can return to the set-up menu from
any program by pressing on the PLUS
and MINUS keys at the same time.
Step 1: Press PLUS and MINUS keys
simultaneously for approximately
3 seconds.
»Setup« appears on the display.
STANDBY MODE
The Standby Mode is automatically activated
after 3 minutes.
You can exit standby mode by actuating the
foot control or pressing the keys.
OPERATION - BACK TO ORIGINAL
PROGRAM
Press PLUS and MINUS keys simultaneously
for approximately 3 seconds to exit the
Set-up Menu.
The original program appears on the display.
Step 2: Press program key P to navigate
in the set-up menu.
Step 3: Press the PLUS / MINUS key to
change the settings in the respective
set-up menu item.
Step 4: Press program key P for
approximately 2 seconds to save.
The set values flash and an acoustic
signal is emitted to confirm that all the
settings have been saved.
OPERATION - RESET FACTORY
SETTINGS
Ncm
Simultaneously press the program P, Endo and
– Ncm keys, for approximately 3 seconds, to
return the current program to factory defaults.
