Combined-languages-d1 - Flipbook - Page 19
USER'S MANUAL
EVOLUTION VETERINARY DENTAL UNITS
19 � EN
OPERATION - CHANGING AND SAVING SETTINGS
The speed / power can be set at P for
minimum 2,000 rpm to maximum
40,000 rpm / 1 to maximum 40
Step 1: Press the program key [P]
Step 3: Increase Speed
Step 4: Reduce Speed
Ncm
Step 2: Increase Torque
[inactive in Restoration & Prosthetics operation]
Ncm
Step 3: Reduce Torque
[inactive in Restoration & Prosthetics operation]
Step 5: Press the program key [P] for
approximately 2 seconds to save.
The set values flash and an acoustic signal is
emitted to confirm that all the settings have
been saved.
OPERATION - FORWARD / REVERSE SETTINGS
Factory Setting – Forward Operation.
Step 1: Press the forward / reverse operation key
»!« and appear on the display and an acoustic
signal is emitted.
»!« and will flash continuously. An acoustic signal
is emitted three times in succession before the motor
is started in reverse operation, via the foot control.
Step 2: Press the program key [P] for approximately
2 seconds to save.
If the program settings are not saved in reverse operation,
the device will switch back to Forward Operation
automatically, when you change programs.
