IM&M Ltd Product Brochure - Catalog - Page 48
SENSE-WARE Flame Detectors and Test Lamps
Best in class, Industrial UV, UV/IR, and IR3 Flame
Detectors. Flame Detector options include:
SENSE-WARE UV Flame Detector
CLICK HERE
to view
datasheet
The SENSE-WARE UV (Ultraviolet) Flame Detector utilizes a
microprocessor for sophisticated electronic signal analysis, suitable
for indoor and outdoor applications such as fume hoods and outdoor
stores. The 昀氀ame detector has non-corrosive housing and is suitable
for indoor industrial areas where corrosion may play a role. UV
(Ultraviolet) energy is emitted by almost every 昀椀re, both hydrocarbon
and non-hydrocarbon 昀椀res. The Ultraviolet Flame Detector will alarm
to Arc Welding. To prevent unwanted alarms, for example, electric arcs
and or uncovered halogen lamps, the delay time for an alarm is 8-10
seconds. This is suf昀椀cient for 90% of the applications. The UV Flame
Detector is suitable for applications that include Hydrogen, Radio
Ampli昀椀er and Antennas but also Heating Rooms for chemicals and
Inside Fume hoods in laboratories. A self-test is performed every hour
to make sure the sensor and electronics operate well. A Test Lamp is
available for regular inspections and end-to-end testing. Swivel mount
bracket available for this product, available in red or white housing.
Compatible with:
SENSE-WARE Flame Detector, Test Lamps
Part Number: UV-185/5CZ
SENSE-WARE UV/IR Flame Detector
CLICK HERE
to view
The SENSE-WARE UV/IR Flame Detector is a combination of an Ultraviolet and
datasheet
Infrared Flame detector which utilizes a microprocessor for sophisticated electronic
signal analysis. The IR part of the 昀氀ame detector has an additional alarm criterion, the
analysis of the 昀氀ame 昀氀icker- frequency. The UV and the IR sensor must both exceed their alarm
threshold to initiate a 昀椀re alarm. The UV/IR Flame Detector has good false alarms rejection capabilities
because the Ultraviolet sensor and the Infrared sensor do not share false alarm sources. The UV/
IR Flame Detector can therefore be applied in areas where single UV or IR 昀氀ame detectors could
potentially cause false and/or unwanted alarms. To prevent unwanted alarms, the dynamic delay time
for an alarm is 4-8 seconds depending on the size and or the distance to the 昀氀ames. The UV/IR Flame
Detector is suitable for applications that include Hydrogen but in fact, every 昀氀ame that emits hot water
will be detected. A self-test is performed every hour to make sure the sensor and electronics operate
well. A Test Lamp is available for regular inspections and end-to-end testing. Swivel mount bracket
available for this product, available in red or white housing.
Compatible with:
SENSE-WARE Flame Detector, Test Lamps
Part Number: UV/IR-210/1CZ
47
Contact our sales team on sales@im-m.co.uk
www.im-m.co.uk
