IM&M Ltd Product Brochure - Catalog - Page 41
Senseware IR3 Flame Detector
CLICK HERE
to view
The SENSE-WARE IR3 flame detectors utilizes a microprocessor for sophisticated
datasheet
electronic signal analysis. The Infrared sensors must exceed their alarm threshold
balance to initiate a fire alarm. The triple IR flame detector uses an additional alarm
criterion, the analysis of the flame flicker-frequency. The infrared IR3 flame detector has good
false alarm rejection capabilities, including Arc Welding (> 3m), chopped sunlight or halogen lights
but is still able to detect a real fire at the same time. To prevent unwanted alarms, the dynamic delay
time for an alarm is 4-8 seconds depending on the size and or the distance to the flames. The triple IR
flame detector is suitable for the detection light- and heavy Hydrocarbon fires, in fact, every yellow to
red flame that emits Carbon dioxide will be detected. A self-test is performed every hour to make sure
the sensor and electronics operate well.
Compatible with:
Senseware Flame Detector, Test Lamps
Senseware Universal T-229/4P UV/IR Flame Detector Test Lamp
The T-229/4P universal UV/IR Flame detector Test Lamp activates UV, IR en UV/IR Flame detector
equipment that work at 185-235 nm UV and wide band IR radiation. For use in safe areas only.
• Universal
• Selectable Continuous mode for UV and
Pulsing mode for IR and UV/IR
• UV detector check up to 8 meters (26 ft)
• IR and UV/IR flame detector check up to
4 meters (13 ft)
• Universal charger 100-240 Vac with pins for
US, EU, GB en AU
Contact our sales team on sales@im-m.co.uk
www.im-m.co.uk
CLICK HERE
to view
datasheet
40
