IM&M Ltd Product Brochure - Catalog - Page 40
Senseware Flame Detectors and Test Lamps
Best in class, Industrial UV, UV/IR, and IR3 Flame
Detectors. Flame Detector options include:
Senseware UV Flame Detector
CLICK HERE
to view
datasheet
The Senseware UV (Ultraviolet) Flame Detector utilizes a
microprocessor for sophisticated electronic signal analysis, suitable
for indoor and outdoor applications such as fume hoods and outdoor
stores. The flame detector has non-corrosive housing and is suitable
for indoor industrial areas where corrosion may play a role. UV
(Ultraviolet) energy is emitted by almost every fire, both hydrocarbon
and non-hydrocarbon fires. The Ultraviolet Flame Detector will alarm
to Arc Welding. To prevent unwanted alarms, for example, electric arcs
and or uncovered halogen lamps, the delay time for an alarm is 8-10
seconds. This is sufficient for 90% of the applications. The UV Flame
Detector is suitable for applications that include Hydrogen, Radio
Amplifier and Antennas but also Heating Rooms for chemicals and
Inside Fume hoods in laboratories. A self-test is performed every hour
to make sure the sensor and electronics operate well. A Test Lamp is
available for regular inspections and end-to-end testing.
Compatible with:
Senseware Flame Detector, Test Lamps
Senseware UV/IR Flame Detector
CLICK HERE
to view
The SENSE-WARE UV/IR Flame Detector is a combination of an Ultraviolet and
datasheet
Infrared Flame detector which utilizes a microprocessor for sophisticated electronic
signal analysis. The IR part of the flame detector has an additional alarm criterion, the
analysis of the flame flicker- frequency. The UV and the IR sensor must both exceed their alarm
threshold to initiate a fire alarm. The UV/IR Flame Detector has good false alarms rejection capabilities
because the Ultraviolet sensor and the Infrared sensor do not share false alarm sources. The UV/
IR Flame Detector can therefore be applied in areas where single UV or IR flame detectors could
potentially cause false and/or unwanted alarms. To prevent unwanted alarms, the dynamic delay time
for an alarm is 4-8 seconds depending on the size and or the distance to the flames. The UV/IR Flame
Detector is suitable for applications that include Hydrogen but in fact, every flame that emits hot water
will be detected. A self-test is performed every hour to make sure the sensor and electronics operate
well. A Test Lamp is available for regular inspections and end-to-end testing.
Compatible with:
Senseware Flame Detector, Test Lamps
39
Contact our sales team on sales@im-m.co.uk
www.im-m.co.uk
