Habonim Catalog Interactive 2024 V04 15022024 - Catalog - Page 32
VALVE FEATURES
End Connections
TC/TCI/TCD
Habonim offers a variety of end connections for its 3-piece
valves, supporting the industry standard connections for
piping in diverse applications and geographies.
Tri-Clamp end - designed to ASME BPE (TC) standard, allows
fast connection or removal of the valve from the line. Mainly
used in the pharmaceutical and food & beverage industries.
BW
SW
Buttweld end for various pipe schedule - designed to ASME
B16.25, EN12627-4, BW code stands for buttweld schedule 40,
for different pipe schedule BW should be followed by the
relevant schedule number (5,10,80,160)
Socket-weld end one piece solid cast designed to ASME B16.11
and EN 12760. Leaving a 1 mm gap (average) between the
pipe end and the socket inner plan is a common welding
practice to avoid internal stress due to thermal expansion
during the welding process
XBW
XSW
Extended buttweld end for various pipe schedule - one piece
solid cast - special design for in-line welding save labor cost and
keep the integrity of the product factory tested.
Extended Socket-weld end one piece solid cast - special
design for in-line welding save labor cost and keep the integrity
of the product 'factory tested'
BWO / BWI / BWD
ETO / ETI / ETD
Buttweld end for various tube standards - designed to ASME
BPE (BWO), ISO 1127 (BWI) and DIN 11850 (BWD). The length
of this end doesn't allow the use of orbital welding.
Extended buttweld end for various tube standards - designed to
ASME BPE (ETO), ISO 1127 (ETI) and DIN 11850 (ETD). One piece
solid cast with sufficient length to allow the use of orbital welding.
Habonim ETD end connections are designed in accordance
to EN10357 – Series A.
Habonim ETI end connections are designed in accordance to
EN10357 – Series C.
Dimensions of the end-connections tube ends are suitable to
be welded on tubes that meet this standard.
For other tube sized ends please contact a Habonim representative.
32
VALVES
