Habonim Catalog Interactive 2024 V04 15022024 - Catalog - Page 256
SANITARY VALVES
Cleaning and Assembling
Habonim’s cleaning, assembly and inspection procedure for the Sanitary line ensures the cleanliness
required by Bioprocessing, Pharmaceutical or Oxygen services.
Habonim uses a state of the art, environmentally friendly, alkaline-based automatic degreasing
system with multiple stages of cleaning, rinsing and drying chambers to ensure that particles,
grease, metal chips and other contamination hazards that can be introduced by a poor deburring
process or shop dirt are removed thoroughly before the assembly process begins. Upon completion
of the cleaning process, the valves are assembled in an oil free restricted area by qualified personnel
who are specially trained to perform this task. The employees wear clean working clothes and latex
gloves throughout the procedure. The equipment and tools are cleaned before use and the work
surfaces are covered with a clean polyethylene sheet before performing the valve assembly.
Durable polymer anti-abrasion ring
HermetiX™ TFM stem seal
Durable polymer thrust seal
FDA approved material seats and seals
Sanitary clamp end
Castings or forgings are applicable to ASME BPE standards and ISO 1127
End-to-End continuous and identical bore diameter
SF2 - Standard internal polishing level of 0.625 μ-m (25 μ-in) Ra max
Austenitic materials with controlled Sulfur 0.005% < S < 0.017 %
Extended ends for orbital welding
Austenitic forged material with Ferrite below 1%.
Austenitic cast materials with controled ferrite.
256
SANITARY VALVES
