EN Catalog 2021-22 - Catalog - Page 60
FUSION TANK
CHAMBERS
With the PetroTite® standard and optimum fusion chambers the riser
section electrofuses to the base, removing the need for multiple bolt
holes and foam gaskets in this area, dramatically reducing the number of
potential leak paths.
With its simplified assembly, this electrofusion system reduces the
installation time. Welding of the chamber can be performed using UPP®
electrofusion equipment in approximately six minutes.
Once welded and cooled, the base and riser of the LA models become
one homogeneous unit with no mechanical joints and no leak points. The
chamber can then be vacuum tested to ensure that it is 100% leak-tight.
The LA Chamber is available in deep or shallow risers.
HIGHLIGHTS
•
With the PetroTite® standard and Optimum fusion
chambers the riser electrofuses to the chamber base–
no bolts, no leaks. Quick installation with no bolt holes.
•
Vacuum testable. Specific testing at critical points ensures
a leak-proof installation.
•
Tank access remains dry and protected even in high water
table areas.
•
Compatible with all UPP® electrofusion entry seals. Fully
welded UPP® system, eliminating mechanical joints and leaks.
•
The two-piece design enables easy access during
installation while the compact design allows for economy
in shipping.
ORDER INFORMATION
Model
Description
OCH-1400-H *
PE-chambers harness
OCH-1400-T1 *
Replacement toggles for OCH-chambers
OCH-1400-BG *
Base seal for chambers
OCH-1400-G *
Gasket watertight lid large bore
CLAMP(OCH)
CLAMP OCH riser–base
LA-007-003 *
Gasket watertight lid small bore
EF1-110V
EF1 welders110 V
EF1-230V
EF1 welders 230 V
OCH-1400-LC
Mechanical toggle for OCH
* May require lead time. Consult factory for availability.
60
