EN Catalog 2021-22 - Catalog - Page 263
PUMP MOTOR
ASSEMBLIES FOR
DEF/ADBLUE®
FE PETRO® brand diesel exhaust fluid pump motor
assemblies (PMAs) feature a stainless steel close-coupled
design powered by a field-proven Franklin Electric motor.
HIGHLIGHTS
ORDER INFORMATION
•
Stainless steel, encapsulated motor ensures longevity
and impermeability to DEF seepage.
DEF - PMA YYY Z
•
Heavy-duty shaft provides superior alignment and
resistance to stress.
•
Double mechanical shaft seals protect the oil-filled
bearing chamber from DEF seepage, assuring minimal
wear and proper bearing lubrication.
•
Stainless steel hydraulics provide superior performance
and efficiency.
•
Multiple models available to meet global requirements
of voltage and frequency.
•
All models are suitable for vertical installation where
the pump motor is suspended off the bottom of the tank
by the discharge piping.
SPECIFICATIONS
Materials: Stainless steel construction including impellers/
diffusers, inlet/outlet, and outer shell
•
Pump type: All models are 5.1" (130 mm) outside
diameter centrifugal type pump
•
Power cable: 23' (7 m) black polyethylene jacketed
plug-in power cable
•
50 Hz pump motor: Three-stage pump with 2" BSPT
female outlet.
•
Motor rating: Continuous operation with motor cooling
provided by product flow and protected from dry running
•
Bypass relief valve with cracking pressure of 30-40 psi
(2.1-2.8 bar) and 4 gpm (15 lpm) minimum flow required
at the discharge of all models.
•
Non-return check valve with maximum cracking pressure
of 3 psi (0.2 bar) required between product piping and
bypass relief valve of all models.
•
Liquid compatibility: All models are intended for use
with Diesel Exhaust Fluid (DEF). DEF is a non-flammable,
non-combustible liquid that has a specific gravity of 1.09
at 68F, and is made per ISO 22241-1 specifications with
32.5% urea and distilled or deionized water. As defined
by ISO 22241-1, DEF is the same as AUS 32 (aqueous
urea solution).
•
DEF = Pump Compatible with DEF
PMA = Pump Motor Assembly
YYY = Pump Motor Hp Rating
•
150 = 1½ Hp fixed speed (1.1 kW)
Z = Motor Electrical Rating
•
B = Single phase, 50 Hz, 210-250 VAC (rated 6.9 Amps,
requires 30 microfarad run/start capacitor rated 440 VAC)
•
C = Three phase, 50 Hz, 380-415 VAC (rated 2.6 Amps)
Note: Three phase models require overload protection in motor starter. Single
phase models have thermal overload protection built into the motor.
50Hz DEF PMA
Model
Description
403383953
DEF-PMA 150B: single phase, 50hz, 200-250 VAC,
1.5 Hp
403383963
DEF-PMA 150C: three phase, 50hz, 380-415 VAC,
1.5 Hp
SUBMERSIBLE
PUMPING SYSTEMS
•
•
•
•
263
