EN Catalog 2021-22 - Catalog - Page 234
3/4 HP FIXED SPEED,
50HZ SUBMERSIBLE
TURBINE PUMPS
Marketers concerned about fuelling times, efficiency, serviceability, reliability and overall quality find it an easy choice
to specify FE PETRO® brand submersible turbine pumps
(STPs). An STP has to be reliable, it has to be safe, and it has
to perform. That's why thousands of station owners around
the world have trusted FE PETRO® STPs and the Franklin
Electric motors that drive them to keep their business flowing
for over 30 years. With best-in-class flow rates and backed
by a long history of dependability FE PETRO® STPs simply do
their job without fail, delivering fuel to customers day after
day without a hitch.
HIGHLIGHTS
SPECIFICATIONS
•
Active air elimination, which eliminates air through the
highest point in the pump head at all times when the pump
is running.
•
3/4 hp fixed speed models are available in variable and
fixed length options.
•
Contractor electrical disconnect, which requires loosening
only one bolt, allowing motor wiring to be disconnected
without venting the dangerous tank vapours into the sump
when servicing.
•
Syphon: venturi-type syphon primer supplied with every
submersible. Syphon check valve and secondary syphon
sold separately.
•
Manual pressure relief vent screw to divert product back
into tank during maintenance.
•
The VL2 pump fits 94% of all known tank diameters and
tank bury depth combinations. The VL1 and VL3 are
available to handle installations shorter or longer than
this range.
•
75B models incorporate a starting and running capacitor,
with internal bleed resistor, rated 440 Volt, 15 microfarad.
•
•
The STP uses the proven FE PETRO® line check valve.
At 70 mm in diameter, the line valve reduces pressure
loss at high flow rates resulting in faster fuelling times.
STP-SCI single-phase smart controllers and STP-CBBS
single-phase control boxes are available for 75B control.
•
75C models require three-phase, 380-415 VAC, 50 Hz
incoming power.
•
The pump motor is 3/4 hp fixed speed, 2875 rpm,
multi-stage centrifugal type pump motor with integral,
automatic, thermal overload protection.
•
STP-SCIIIC three-phase smart controllers and STP-CBB
three-phase magnetic starters available for 75C control.
Liquid Compatibility
Max. liquid viscosity: 70 SSU at 60°F (15°C).
•
•
234
Standard models are listed for fuel mixtures containing up
to 10% ethanol with gasoline, and 20% MTBE, 20% ETBE,
or 17% TAME with gasoline.
•
STPAG models are compatible with fuel mixtures
containing diesel fuel with up to 20% biodiesel, 100%
biodiesel, up to 85% ethanol with gasoline, and 20%
MTBE, 20% ETBE, or 17% TAME with gasoline.
•
3/4 hp fixed speed models can also be used for fuel
mixtures containing up to 5% biodiesel with diesel fuels,
fuel oils, kerosene, Avgas and jet fuels in a non-gelled,
pourable state.
•
All wetted elastomers are made of a high grade,
fluorocarbon compound.
Power Requirements
• 75B models require single-phase, 200-250 VAC, 50 Hz
incoming power.
Approvals/Certifications
• Consult factory for applicable approvals.
Quality Certification
• ISO 9001 Certified Manufacturer
