EN Catalog 2021-22 - Catalog - Page 231
SPECIFICATIONS
•
1½ hp fixed speed models are available in variable and
fixed length options.
•
Check valve: 70 mm diameter fluorocarbon seal
constructed on cast aluminium body and steel
backing washer.
•
Pressure relief valve: available in four pressure relief
settings, integral to check valve. Standard model relieves
at 2.76 bar and resets above 2.41 bar.
•
Syphon: venturi-type syphon primer supplied with every
submersible. Syphon check valve and secondary syphon
sold separately.
•
Air eliminator: every submersible includes a tank
return path with one-way check valve to provide
active air elimination.
•
Liquid Compatibility
• Max. liquid viscosity: 70 SSU at 60°F (15°C).
Electrical disconnect: electrical yoke for positive contractor
disconnect during service.
•
Standard models are listed for fuel mixtures containing up
to 10% ethanol with gasoline, and 20% MTBE, 20% ETBE,
or 17% TAME with gasoline.
•
STPAG models are compatible for fuel mixtures containing
diesel fuel with up to 20% biodiesel, 100% biodiesel, up to
85% ethanol with gasoline, and 20% MTBE, 20% ETBE, or
17% TAME with gasoline.
•
1½ hp fixed speed models can also be used for fuel
mixtures containing up to 5% biodiesel with diesel fuels,
fuel oils, kerosene, Avgas and jet fuels in a non-gelled,
pourable state.
•
All wetted elastomers are made of a high grade,
fluorocarbon compound.
Approvals/Certifications
• Consult factory for applicable approvals.
Pump Motor
• 1½ hp fixed speed, 2875 rpm, multi-stage centrifugal
type pump motor with integral, automatic, thermal
overload protection.
Quality Certification
• Franklin Fueling Systems is an ISO 9001 Certified Manufacturer.
Power Requirements
• 150B models require single-phase, 200-250 VAC, 50 Hz
incoming power.
•
150B models incorporate a starting and running capacitor,
with internal bleed resistor, rated 440 Volt,15 microfarad.
•
STP-SCI single-phase smart controllers and STP-CBBS
single-phase control boxes are available for 150B control.
•
150C models require three-phase, 380—415 V,
50 Hz incoming power.
•
STP-SCIIIC three-phase smart controllers and STP-CBB
three-phase magnetic starters available for 150C control.
1½ HP Fixed Speed Turbine Performance Chart
(STP150C)
45
45
40
40
35
35
Total Head in Meters
50
30
25
20
30
25
20
15
15
10
10
5
5
0
0
50
100
150
200
250
300
350
Flow in Liters per Minute (LPM)
Note: Performance based on pumping solvent (0.78 specific gravity). Pressure
is taken at the manifold discharge outlet. Fixed Speed 1.5 HP was powered by
Single-Phase, 50 Hz, 250 Volt incoming supply.
400
0
4500
SUBMERSIBLE
PUMPING SYSTEMS
Total Head in Meters
(STP150B)
50
50
500
100
150
200
250
300
350
400
Flow in Liters per Minute (LPM)
Note: Performance based on pumping solvent (0.78 specific gravity). Pressure
is taken at the manifold discharge outlet. Fixed Speed 1.50 HP was powered by
Three-Phase, 50 Hz, 415 Volt incoming supply.
231
450
