EN Catalog 2021-22 - Catalog - Page 229
ORDER INFORMATION CONTINUED
Alcohol-Gas (AG) 2 Hp Fixed Speed Submersible Turbine Pumps
Alcohol-Gasoline Model
Description
Model Length Range Number
Model Length* Range
STPAG200B-VL1
2 hp AG fixed speed, single-phase
VL1
1632 mm—2374 mm
STPAG200B-VL2
2 hp AG fixed speed, single-phase
VL2
2420 mm—3981 mm
STPAG200B-VL3
2 hp AG fixed speed, single-phase
VL3
3233 mm—5575 mm
STPAG200C-VL1
2 hp AG fixed speed, three-phase
VL1
1575 mm—2317 mm
STPAG200C-VL2
2 hp AG fixed speed, three-phase
VL2
2363 mm—3924 mm
STPAG200C-VL3
2 hp AG fixed speed, three-phase
VL3
3175 mm—5518 mm
Notes:
1. STP models are compatible with fuel mixtures containing up to 10% ethanol
with gasoline, up to 5% biodiesel with diesel fuels, and 20% MTBE, 20% ETBE or
17% TAME with gasoline. STPAG models are compatible with fuel mixtures
containing diesel fuel with up to 20% biodiesel, 100% biodiesel, up to 85%
ethanol with gasoline, and 20% MTBE, 20% ETBE or 17% TAME with gasoline.
3. All 200B models require single-phase, 200-250 VAC, 50 Hz incoming power.
All 200C models require three-phase, 380-415 VAC, 50 Hz incoming power
2. All models are supplied with a standard check valve unless factory option "R"
or "W" is specified.
*Model length (A) defined as the dimension from turbine manifold bottom to
pump motor inlet.
4. 4" riser pipe, if supplied locally, must be 4½" OD by 3/16" WT tubing.
5. For riser pipe lengths 787mm to 1524mm, additional charge applies (call
customer service for lead times).
Factory Installed Approvals
May specify one in model number at time of STP order.
Model
Description
(ATXF)
Submersible turbine pumps with ATEX Flameproof approval for EN markets
(RT)
Submersible turbine pumps with ROSTEST approval for Eastern European markets
Note: If not otherwise specified, all models are supplied to UL approval as standard.
Consult Factory for other local approvals.
Factory Installed Options
Specified in model number at time of STP order.
Model
Description
F
Floating suction adapter, 1½" NPT female, must be factory installed
H
High Pressure 3.1 bar deadhead output
K
IFS (intake filter screen) factory assembled to pump motor assembly
M
Magshell™ (flow enhancing, expanded PMA shell)
R
Model R check valve, factory installed, for Veeder Root™ PLLD Line Leak
W
Model W check valve, factory installed, for Red Jacket™ PPM4000 Line Leak
Field Installed Options
2 hp fixed speed specific accessories.
Description
400137937
Syphon check valve, alcohol-gasoline compatible
5800100215
STP-SCI, single-phase smart controller
400818922
STP-CBBS, single-phase control box with lockout switch, 240 Volt coil
402312922
STP-DHIB-SCI, combo DHIB with factory wired to STP-SCI
402313922
STP-DHIB-CBBS, combo DHIB with factory wired STP-CBBS
402459931
Model 65 PSI (4.5 bar) relief check valve (AG compatible for slave of manifolded STPs with Veeder Root™ PLLD)
402507930
Secondary syphon kit (when two syphon primes are required for one STP)
401220965
STP-CBB3C, three phase 380-415 VAC magnetic starter
5800300200
STP-DHIB, dispenser hook isolation for 240 Volt dispenser handle switches, up to eight each
SUBMERSIBLE
PUMPING SYSTEMS
Model
*When purchasing STP-SCI or STP-DHI-SCI in equal quantities of fixed speed 4" STPs, the STP-SCI or STP-DHI-SCI will be invoiced at special discount pricing.
Veeder-Root is a trademark of Danaher Corporation.
Red Jacket is a trademark of Veeder-Root Company.
229
