UL Catalog 2024-2025 - Flipbook - Page 81
SPECIFICATIONS
Variable Length Range
Pump Motor Assembly
Stainless steel construction including
impellers/diffusers, inlet/outlet, and outer shell
Pump type
All models are 5.1" (130 mm) outside diameter
centrifugal type pump
Power cable
23' (7 m) black polyethylene jacketed
power cable
60 Hz pump motor
Two-stage pump with 2" NPT female outlet
Motor rating
Continuous operation with motor cooling
provided by product flow and protected from
dry running
Minimum 6" (152 mm)
Diameter Pump Access
Recommended
(A)
Submersible Turbine Pump Kit
Materials
All stainless steel hardware and Viton®
or EPDM seals
Bypass relief valve
Non-return check valve cracking pressure of
3 psi (0.2 bar) between product piping and
bypass relief valve of all models
Non-return
check valve
23' (7 m) black polyethylene jacketed
power cable
Liquid
compatibility
All models are intended for use with Diesel
Exhaust Fluid (DEF). DEF is a non-flammable,
non-combustible liquid that has a specific
gravity of 1.09 at 68˚ F (20˚ C), and is made
per ISO 22241-1 specifications with 32.5%
urea and distilled or deionized water. As
defined by ISO 22241-1, DEF is the same as
AUS 32® (aqueous urea solution) and also
commonly known as AdBlue®.
3" (76 mm) Bottom Clearance Typical
Variable Length Range (A)
Model Length Range
Model Length Designation
69" - 102"
(1,750 mm - 2,590 mm)
VL1
102" - 166"
(2,590 mm - 4,215 mm)
VL2
Pump Motor Performance
DEF-PMA150A (Single-Phase) and DEF-PMA150D (Three-Phase)
120
Total Head in Feet
100
80
60
40
20
0
0
10
20
30
40
50
60
70
80
90
Flow in Gallons per Minute (gpm)
Note: Performance is based on pumping water (1 specific gravity). Pressure is taken at the discharge outlet of the pump motor.
AdBlue® is a registered trademark of Verband der Automobilindustrie.
Viton® is a registered trademark of E. I. du Pont de Nemours and Company.
AUS 32® is a registered trademark of GBZI Ltd.
81
SUBMERSIBLE
PUMPING SYSTEMS
Materials
