UL Catalog 2024-2025 - Flipbook - Page 75
SUBMERSIBLE
PUMPING SYSTEMS
GUARDIAN SERIES™ THREE
PHASE PUMP CONTROLLER
The Guardian Series™ Three Phase controller takes a major leap forward in
fixed speed Submersible Turbine Pump (STP) control. Built upon the fixed
speed Single Phase Guardian Controller platform, three phase fixed speed
pump controllers feature an enhanced user interface, greater functionality,
and higher performance compared to standard control boxes.
SPECIFICATIONS
HIGHLIGHTS
• Compatible to new or retrofit applications with most FE PETRO® three
phase fixed speed STPs, FE PETRO® single phase Diesel Exhaust Fluid
pump module assembly (PMA), and comparable competitive STPs
(SW2 Pole 6 ON).
Dimensions
91⁄16" x 73⁄4" x 51⁄2"
(230 mm x 196 mm x 140 mm)
−
Motor Contact
Rating
• 3½ digit LCD provides readable running and fault status for
quick troubleshooting.
• Separate “Reset” and “Silence/Calibrate” push buttons provide
clear interaction with the controller.
• Automatically logs the last five abnormal conditions seen in the pumping
system. This data is retained in non-volatile memory. Service technicians
can quickly view a history of abnormal conditions, which is particularly
useful when troubleshooting intermittent conditions.
• Over voltage protection and enhanced underload detection protects
pumping system equipment.
• With a single press of the “Calibrate” button, the controller will automatically
learn the electrical characteristics of the STP for easy setup or retrofit.
−
TPGC-220 rated 5 Hp, 208-240 VAC,
60 Hz, Three Phase
TPGC-380 rated 5 Hp, 380 VAC,
50 Hz, Three Phase
Switch Hook
Rating
120-240 VAC, 50/60 Hz
Enhanced
Functionality
An integrated RS 485 com port is provided
to connect Guardian Series™ Controllers to
EVO™ Series for enhanced functionality via
Turbine Pump Interface (TPI).
Approvals /
Certifications
−
−
−
ULc listed
CE certified
ISO 9001:2015 certified manufacturer
Capabilities
Capability
Pump Compatibility
Standard Three Phase Starter
(STP-CB5)
Smart Controller
(STP-SCIII/STP-SCIIIC)
Guardian Series™ Controller
(TPGC-220/-380)
up to 5 Hp
up to 5 Hp
up to 5 Hp
Horsepower Selection
Not Applicable
Required
Not Required
Standard THHN Wiring
YES
YES
YES
Primary/Secondary Pump Operation
NO
YES
YES
Alternating Pump Operation
NO
YES
YES
Communication Display
NO
YES, yellow flashing light
YES, yellow flashing light
YES, displays “IdLE”
Incoming Power Display
NO
YES, solid green light
Pump Running Display
YES, red pilot light
YES, green flashing light
YES, flashes “run”
Fault History Readout
NO
SCIII = NO, SCIIIC = YES
YES, displays last five faults
Fault Diagnostics
NO
YES, red flashing light
YES, red backlight display
Underload (dry run) Detection
NO
YES, 1 red flash
YES, flashes “UL”
Low Incoming Voltage Protection
NO
YES, 2 red flashes
YES, flashes “LI”
High Incoming Voltage Protection
NO
YES, 12 red flashes
YES, flashes “HI”
YES, flashes “OL”
Overload (running) Detection
YES
YES, 3 red flashes
Overload (startup) Detection
YES
YES, 3 red flashes
YES, flashes “Lr”
Open Circuit Detection
NO
YES, 4 red flashes
YES, flashes “OC”
Extended Run Protection
NO
YES, 9 red flashes
YES, flashes “Er”
Relay Failure Protection
NO
YES, 10 red flashes
YES, flashes “rEL”
Phase Loss Detection
NO
YES, 11 red flashes
YES, flashes “23o”
Unbalanced Phase Warning
NO
YES, 13 red flashes
YES, flashes “Ubl”
Unbalance Load Warning
NO
YES, 14 red flashes
YES, flashes “UBL”
Audible Fault Alarm
NO
YES, reset/silence button
YES, separate silence button
75
