UL Catalog 2024-2025 - Flipbook - Page 48
ORDERING INFORMATION CONTINUED
Fixed Length Submersible Turbine Pumps
Model
Description
STP75
¾ Hp fixed speed
STP150
1½ Hp fixed speed
STPH150
1½ Hp high pressure fixed speed
STPM200
2 Hp fixed speed with MagShell®
STPHM200
2 Hp high pressure fixed speed with MagShell®
Model Length* Range
37" – 132"
Notes:
1. Remove “M” from model number for non-MagShell® pump motor assembly.
2. STP models are compatible with fuel mixtures containing up to 10% ethanol with gasoline, up to 5% Biodiesel with diesel fuels, and 20% MTBE, 20% ETBE or 17% TAME
with gasoline. STPAG models are compatible with fuel mixtures containing diesel fuel with up to 20% Biodiesel, 100% Biodiesel, up to 85% ethanol with gasoline, and 20%
MTBE, 20% ETBE or 17% TAME with gasoline.
3. All models are supplied with a standard check valve unless factory option “R” or “W” is specified.
4. All above models require single-phase, 208-230 VAC, 60 Hz incoming power.
5. 4" riser pipe, if supplied locally, must be 4½" OD by 3⁄16" WT tubing.
6. For riser pipe lengths 31" to 60", additional charges apply (call Customer Service for lead times).
*Model length (A) defined as the dimension from turbine manifold bottom to pump motor inlet. Model length (A) can be a minimum of 37" to a maximum of 211". Adder
(p/n 400326912) applies if model length is 133" to 180" (charge is for boards to protect STP shipment). Adder (p/n 400326917) applies if model length is 181" to 211"
and (p/n 400389112) applies if model length is 212" to 246" (additional charge is for crating to protect the STP).
Factory Installed Options
Model
AG
Description
Alcohol-gasoline compatible
F
Floating suction adapter, 1½" NPT female, must be factory installed
K
IFS (intake filter screen), factory assembled to pump motor assembly
R
Model R check valve, factory installed, for Veeder-Root® PLLD Line Leak
Field Installed Options
48
Model
Description
400137937
Syphon check valve, alcohol-gasoline compatible
400818921
STP-CBS, single-phase control box with lockout switch, 120 Volt coil
402312931
STP-DHI + SPGC-220 Guardian Series™ Single Phase Smart Controller bundle
402313921
STP-DHI-CBS, combo DHI with factory-wired STP-CBS
402459931
Model 65 psi check valve AG compatible, (for secondary of manifolded STPs with Veeder-Root® PLLD)
402507930
Secondary syphon kit (when two syphon primes are required for one STP)
5800100220
SPGC-220 Guardian Series™ Single Phase Smart Controller
5800300100
STP-DHI, dispenser hook isolation for 120 Volt dispenser handle switches, up to eight each
