UL Catalog 2024-2025 - Flipbook - Page 343
DISCRIMINATING
MAGNETOSTRICTIVE
SENSOR (DMS)
The DMS sensor is a fast-acting, discriminating sensor that utilizes
magnetostrictive position measurement technology to provide reliable
monitoring of dispenser pans and containment sumps. Utilizing one
float to measure water level and one float to measure product level,
the DMS allows for the system to have programmable water and
product alarm points. The DMS also has anti-tamper capability that
notifies the system if the sensor is moved from its installed position.
HIGHLIGHTS
• Utilizes proven magnetostrictive technology.
• Water warning, water alarm, and product alarm.
• Tamper protection feature will alarm if sensor is moved from
installed position.
• Alarms and recovers quickly when liquids are present.
ORDERING INFORMATION
Model
Description
TSP-DMS-12
Discriminating magnetostrictive sensor,
monitors 12" (305 mm) of liquid & measures 22"
(559 mm) in length (all EVO™ Series)
TSP-DMS-24
Discriminating magnetostrictive sensor,
monitors 24" (610 mm) of liquid & measures 34"
(864 mm) in length (all EVO™ Series).
TSP-KS
Unistrut™ mounting kit
Note: The TSP-DMS communicates with the EVO™ 550, EVO™ 5000, EVO™ 600,
and EVO™ 6000 using the Probe Module (TS-PRB).
FUEL MANAGEMENT
SYSTEMS
UNIVERSAL LIQUID SENSOR (ULS)
Based on float-switch technology and made of chemically-resistant materials, the ULS is a
low-cost sensor that can be installed in sumps, dispenser pans, steel double wall tanks or
other locations where the presence of liquid indicates a leak has occurred.
HIGHLIGHTS
• Highly reliable float technology and closed output
circuit ensures that leaks are detected.
• Chemical-resistant materials assure compatibility with
most liquids.
• Each ULS sensor comes with a 25' (7.6 m) cable. 1⁄2" NPT
thread is provided on the compression gland fitting attached
to the sensor’s cable, allowing it to be suspended from
standard electrical boxes and fittings. The sensor may be
positioned vertically by adjusting cable length. For steel
interstitial tanks, ULS is lowered into the opening provided
on the tank and is suspended by optional TSP-KI2
installation kit. Other mounting methods available
depending upon application and location.
ORDERING INFORMATION
Model
Description
FMP-ULS
Universal liquid sump sensor (all EVO™ Series)
TSP-ULS
Universal liquid sump sensor
(for use with S940 only)
TSP-KI2
Interstitial sensor riser cap kit for 2" (51 mm)
riser pipes
Note: The FMP-ULS communicates with EVO™ 600 and EVO™ 6000 using the
Universal Device Protocol Module (FMP-UDP9). The FMP-ULS also communicates
with the EVO™ 550, EVO™ 5000, EVO™ 600, and EVO™ 6000 using the 2-Wire
Sensor Module (TS-2WSNS) or the 3-Wire Sensor Module (TS-3WSNS).
343