UL Catalog 2024-2025 - Flipbook - Page 201
SPECIFICATIONS CONTINUED
Pipe Outer Layer
PE100
Pipe Liner Layer
Ethylene vinyl alcohol (EVOH) resin liner
Pipe Intermediate Layer
Tie-layer permanently bonds HDPE outer layer to EVOH resin liner layer
Temperature Rating
-22° F to 122° F
Primary Pipe Pressure Rating
90 psi
Secondary Pipe Pressure Rating
58 psi
1½" and 2" Double Wall Pipe Bend Radius
3'3"
3" and 4" Double Wall Pipe Bend Radius
13'2"
2" Single Wall Vent/Vapor Pipe Bend Radius
3'3"
Approvals / Certifications
UL971 listed
UL971 listed for fuels including:
PIPING &
CONTAINMENT
– Motor vehicle fuels typically found in consumer dispensing facilities like
gasoline or diesel including blended fuels with maximum 15% MTBE,
15% Methanol or 30% Ethanol
– Concentrated fuels such as alternate unblended fuels containing up to
100% concentrations of Toluene, Methanol or Ethanol
Fuel Compatibility
– High blend fuels with higher than normal gasoline blends with maximum
50% Methanol or 50% Ethanol
– Aviation and marine specialty fuels containing up to 100% kerosene
or leaded gasoline
– Michigan, Wisconsin, and Florida EQ-816. leaded gasoline
– Biodiesel up to 5% (B5)
– Biodiesel up to 20% (B20)
– Biodiesel at 97% - 100% (B99 / B100)
Biodiesel Compatiblity
– All ASTM defined biofuel blends
– High-blend Ethanol, with ethanol/gasoline blends between 51% - 83%
(E51 - E83) - commercially known as “E-85”
Pipework Dimensions
Model
Description
001-063-050-XXXPSE
1½" double wall pipe
Nominal Primary Pipe
Nominal Secondary Pipe
ID
OD
ID
OD
1.67"
1.97"
2.18"
2.48"
001-075-063-XXXPSE
2" double wall pipe
2.12"
2.48"
2.59"
2.95"
001-110-090-019PSE
3" double wall pipe
3.02"
3.54"
3.82"
4.33"
001-125-110-019PSE
4" double wall pipe
3.69"
4.33"
4.34"
4.92"
001-063-019VE
2" single wall pipe
2.12"
2.48"
--
--
001-090-019VE
3" single wall pipe
3.02"
3.54"
--
--
Note: For “XXX” enter pipe lengths from available unit options found in the following pages.
201
